What does this phrase means, "0.5M in sulfuric group of poly(4-styrenesulfonic acid) (PSS)"?

I dont understand how to prepare the solution because i dont understand what does it mean, and i dont know the conc. of the PSS stock solution.

31 December 2018 2,181 1 View

Is there a free pogram to analyze the .pro file with profiling also from alpha step 500 as the main software is not free?

trying to analyze data at home while not in the lab

05 June 2018 8,276 0 View

What is an optimum parameter to C coat MO on glass substrate for SEM?

Using JEC 560 auto carbon coater 3KPa , and 30 s I think its a bit too long.

04 May 2018 9,555 2 View

Need advice to cut cross section of porous film on FTO for SEM. Sample came off when cut with glass cutter, no sample seen at edge of cut FTO. Help?

Cross section cut of porous sample /FTO scratch off sample from the edge of the FTO making it hard to check in SEM. Need help to cut it so the film stays on the edge of the cut.

31 December 2017 9,636 0 View

Can I freeze a CoPi/ metal oxide in N2 before cutting it cross section for SEM?

Planning to do it this way, but cannot help worrying about possible changes that will happen to Co-Pi coating.

31 December 2017 5,110 2 View

Do I mix the binder into ultra-sonicated powder immediately or wait for 2-3 hours to settle then mix supernatant with binder, and then stir it ?

Plan to make a paste but confused if we should wait for the sonicated powder to settle first and add binder to only the supernatant, or do we just add binder to the ultrasonicated powder...

07 August 2017 8,755 0 View

What paper have these ingredients: tungsten isopropoxide , acetic acid, ethanol and distilled water to synthesis WO3?

looking for a research paper synthesizing WO3 with the above ingredients.

05 June 2017 1,467 0 View

Can i add dispersant after precipitating metal oxide from addition of alkali and acid to metal oxide NP (chemical deagglomeration)?

31 December 2016 5,938 6 View

How to find concentration of solution based on solid content. The solution is made of synthesized powder suspended in liquid?

31 December 2016 7,328 2 View

Can 1- nonanol, acetyl acetone and triton X-100 be put in the same medium?

its for thin film paste making.

31 December 2016 7,819 5 View

No title

02 March 2021 932 1 View

How to polymerize TEOS?

I want to polymerize TEOS on a surface. I know that NH4OH is a preferred catalyst and an alcoholic solvent should be used .But I can not find certain amounts of each material to use. Does any one...

02 March 2021 1,404 6 View

APA 7th In-Text citations with two references with three authors with the same surname, but four different author?

I have an issue with APA 7th in-text citation. II have two papers where the first three authors are the same, and the fourth is different. I am using the Mendeley desktop app, and automatically it...

02 March 2021 790 3 View

Where can I find life cycle inventory or assessment of non woven materials?

Dear network, I am looking for the LCA or LCI or at least the energy balances of the non woven fabrics process for my master project, in specific for natural fibers, yet I have found...

02 March 2021 9,662 1 View

How optimize the Size Exclusion Chromatography?

Hello! I'll do a size exclusion chromatography, but I only have an open column, and I'll perform the peptide extraction from yeast, using buffer lysis (sodium phosphate 50 mM/NaCl 30 mM/DNAse and...

01 March 2021 2,215 2 View

How to quantify carbon deposition on CuZnAl catalyst?

Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...

01 March 2021 1,907 3 View

How Download/Extract citations of 1 given year ALL my publications in Google Scholar?

If you google this you find a lot of smart guys explaining you how to download 1 year of citations of 1 single paper of yours (or anyone else). I mean 1 year of ALL my papers. or ... ALL years or...

01 March 2021 1,121 9 View

How can I edit suggested publications?

Hi there! I regularly receive suggestion about papers and authors that are totally out of my area. Does anybody know how I can fix this? Thank you!

01 March 2021 9,574 4 View

Could you please recommend some good journal that accept very long revie papers (approximately 6000+ words) in neurosurgery, cancer biology ?

Could you please recommend some good journal that accept very long revie papers (approximately 6000+ words) in neurosurgery, cancer biology ?

01 March 2021 8,087 3 View

Any research paper call for publication related to management or finance or economics?

It should be standard journal (Indexed)

01 March 2021 8,379 1 View