Heterogeneous reactions of biomass pyrolysis using ANSYS FLUENT?

More Md. Shakhaoath Khan's questions See All

CHEMKIN MECHANISM file for primary pyrolysis including kinetic constants

Dear Experts, Does anyone have "CHEMKIN MECHANISM file (to import in ANSYS FLUENT)" for primary pyrolysis reactions ?

01 January 1970 6,074 2 View

Methodical difference between standard and hybrid initialization in FLUENT ?

Dear experts, could you please discuss here the methodical difference between standard and hybrid initialization in FLUENT. As far I know the basic difference is about initial guess, however, I'm...

01 January 1970 5,561 0 View

Hi, has anybody used Ansys Fluent (Eulerian-Eulerian) to investigate 3D solid-liquid fluidised beds?

Hi, has anybody used Ansys Fluent (Eulerian-Eulerian) to investigate 3D solid-liquid fluidised beds? If so, kindly suggest me, what parameters/model/solutions methods can be used to get more...

01 January 1970 6,501 2 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

How to show arrows over the streamlines in CFD-post?

I follow this to make streamlines like the photos attached below: (software- CFD post-processing) First I plot the 2D streamline over a surface "streamline 1". them I plot a vector by the...

01 March 2021 8,668 3 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

How to increase mesh quality of a cfd model in ansys fluent?

How can one improve mesh skewness, orthogonality, aspect ratio?

28 February 2021 7,730 3 View

How to model Supercritical water gasification (SCWG) process in Homer software?

Hi everyone How to model Supercritical water gasification (SCWG) process in Homer software?

25 February 2021 4,075 1 View

How do you mesh a thin solid in Fluent?

Hello, I have used the shell function on SpaceClaim to create thin solids for the model I am studying. These are contained within an enclosure for my study. I chose this approach as it avoids the...

24 February 2021 8,856 3 View

How to extract the y+ value from fluent ?

I am doing a 3D steady simulation of a wind rotor using Ansys Fluent. In order to have a y+ of 1, I created 10 inflation layers using total layer thickness method, and I started a first...

23 February 2021 2,819 3 View

Is it possible to define biogas as a fuel in the reformer process(scwg) in Homer software?

Hi every one Is it possible to define biogas as a fuel in the reformer process(scwg) in Homer software? Biogas fuel is not available in the options thanks

23 February 2021 6,518 3 View

Help with assigning pressure boundary conditions in FLUENT on a large structure?

Hello, I created a very tall tower (>1000m) and applied pressure boundary conditions at the inlet (bottom) and outlet (top) that correspond to the pressure are their relative altitudes....

22 February 2021 9,972 4 View

Naseer H. Hamza

following

Hassan Nima

this link is useful

https://www.sciencedirect.com/science/article/.../S096085241630168...

regards

Md. Shakhaoath Khan

Hi Hassan Nima , thanks for your reply. Unfortunately, the link you provided is not working. Kindly mention the title of the article so that I can download.