Hello, I am working on CO2 adsorption on Graphene/MoS2 hybrid structure using DFT, please i am looking for different structures of this combination?

More Francis Enujekwu's questions See All

I obtain two plateu instead of one in LFP cathode assembled with graphite anode in 1M LiTFSI in DOL/DME, what does this mean?

I have attached the charging curve from the battery tester for review. I need help on what is happening

21 July 2024 6,898 2 View

What is the state of matter of PLGA-PEG-PLGA with a Mw of 5kDa? Should I expect a powder or a viscous gel?

I got a viscous gel after precipitating it in water at 80 C. Additionally, I performed freeze drying and still got a viscous gel. Could I be having entrapped water in the triblock polymer? What is...

21 June 2024 8,650 2 View

What are the theories for addressing challenges in implementing Human Resource Management Information System (HRMIS) in Tanzania?

I want to know the theories for addressing challenges encountered in the implementation of HRMIS/HCMIS/HRIS in Tanzania. Are they flexible in Tanzanian context?

17 May 2024 954 1 View

What specific mechanisms are involved in the elevation of lactate dehydrogenase (LD) activity in underfilled vacuum blood collection tubes?

Neuwinger et al. (2019) conducted a comprehensive analysis to determine the effect of underfilling vacuum blood collection tubes on lactate dehydrogenase (LD) activity. Underfilling tubes resulted...

09 April 2024 5,044 2 View

How do effective succession planning impact higher education institutions?

Does succession planning determine the longevity and sustainability of a higher education institution?

30 March 2024 2,009 3 View

What is Role of Microcredit in Promoting Sustainable Agricultural Practices and Improving Food Security among Smallholder Farmers?

Research

16 March 2024 766 4 View

What is the Role of Microcredit in Promoting Sustainable Agricultural Practices and Improving Food Security among Smallholder Farmers?

Research

16 March 2024 4,296 5 View

How can I accurately determine the count of handovers taking place within a 5G network when simulating with NetSim?

When conducting simulations within the NetSim 5G environment, I aim to quantify handover occurrences accurately as user equipment moves between base stations. I am looking for guidance on the...

03 March 2024 5,294 4 View

How can i determine the conductivity of anion exchange membrane by the impedance analysis .?

how To determine the conductivity of anion exchange membrane using EIS and how to setup the cell for to determine the conductivity

03 March 2024 5,164 0 View

What are some Strategies for Efficiently Simulating Large-Scale 5G Networks in NetSim?

I want to simulate a network with approximately 50 gNBs and 500 UEs with different deployment options such as random, uniform, and hexagonal for the gNBs, and uniform, random deployment for the...

03 March 2024 566 6 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

Absorption coefficient of methane?

Hello, Can anyone provide me with the absorption coefficient of methane gas at 7.7 um? Any reference?

06 August 2024 980 5 View

In the presence of VERY high concentration (1000 ppm) of silicon, the adsorption isotherms of arsenic are showing anomalous trends, why so?

I conducted an adsorption experiment of arsenic on soil in the presence of different doses of silicon as competing ions to see the effect of silicon on arsenic adsorption and desorption. I took 5...

03 August 2024 6,500 3 View

How combine yolo with Faster R-CNN?

I want a model that is balanced with accuracy or speed, faster rcnn has high accuracy while yolo have fast speed. i am thinking to combine them to get a hybrid model to achieve both speed and accuracy

02 August 2024 3,104 0 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,978 2 View

Question about combustion Kinetics ?

I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...

30 July 2024 6,137 0 View

What are the perfect mathematical model for a solar-powered ship implementation?

A computational study of heat flux on cylindrical surfaces using CNT hybrid nanofluids

28 July 2024 4,985 1 View

A. Nijamudheen

Hi Francis,

You may use any standard free software like vesta, avogadro, or iqmol to build them. Tutorials are available online on how to use these software.

Francis Enujekwu

Thank you so much Nijamudheen, I will try to get them. Actually I am using CASTEP and VASP for my modelling

Yue Zhang

Hi!

You can use the Visualizer module of Materials Studio software to make the initial structure. It's very easy to learn. But I don't know which code you use for calculation.

Hi Yue,

I am using Materials Studio castep, I will learn it immediately but can you offer some tips

It's an very easy software, maybe you can give me more informations of you, or, you can contect me [email protected]