Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Which fluorescent dye to use for measuring total ROS production?

Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?

01 March 2021 9,447 3 View

Does any one can help me choose a reasonable basis set for intermediate metal ions interactions with guanine (i.e Fe2+, Mn2+, Cu2+ and exc.)?

Hello every body Does any one has any idea to help me choose a reasonable basis set for intermediate metal ions (i.e Fe2+, Mn2+, Cu2+ and exc.) interactions with guanine or other DNA organic...

01 March 2021 6,187 2 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

Tooth extraction and subsequent dental implant placement in Sprague-Dawley rats induce differential changes in anterior digastric myofibre size and ?

01 March 2021 7,254 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

How can Gamma Ray API units be converted to CPS (counts per second)?

Oil and gas companies run gamma ray tool and take readings in API units while Gamma ray is also noted in cps, so how these units can be converted into each other?

24 February 2021 7,545 2 View

What is the best etching method for Mg-Ca alloy?

I have used Picral etchant (4.2 g Picric acid, 10 mL Acetic acid, 70 mL Ethanol, 10 mL distilled water) but it didn't work. Is there any alternative?

21 February 2021 2,558 5 View

How to consider effects of rapid warm adaptation in modeling of ecological impacts of warming?

I would highly appreciate it if my fellow ecologists (biologists) provide their opinion on the thoughts below [esp., shortly tell us which path may be more effective, if they know another way, if...

15 February 2021 3,642 6 View

Student writing his own Learning Outcomes - is this the way forward?

'Students just dont want to study; they are here to waste time!' I have heard this phrase many times; so are the students solely to be blamed? We will find many students who just dont seem to...

04 February 2021 8,546 22 View

What is the best visualisation solvent for xylooligosaccharides using TLC?

I am interested in using TLC to detect non-linear xylooligosaccharides. What would be the best visualisation solvent? Would aniline phthalate solution be suitable? I have also seen people...

02 February 2021 7,748 3 View

How to calculate the polysaccharide content of a curcuma species through HPLC method?

what all standards are needed to quantify and analyze the composition with a proper method fie for the mobile phase to run the sample ?

31 January 2021 7,704 4 View

Are any database collected cell penetrating anticancer peptides ?

Dear researchers, Anticancer peptides(ACPs) with cell-penetrating properties can enter to cytoplasmic space of cancer cells and induce cell death. but, I could not find the database that...

29 January 2021 707 3 View

How to extract polysaccharids from Aloe gel?

I 'm trying to extract polysacharides from Aloe leaf and tried ethanol percipitation, but after getting the pellet. I used the protocol from following reference following the steps, but I don't...

27 January 2021 7,049 5 View

How can I remove salts from crude seaweed extract (except dialysis)?

Hi, I am interested to obtain phenolic fractions from crude seaweed extracts (using ethanol) and test for their antioxidant properties. Since most of the in-vitro antioxidant assays are...

26 January 2021 3,889 5 View