Genescan gives 3 peaks instead of one?

Hi all, I am doing a genescan analysis for a deleted exon in the patient sample. The amplified region is 215 bp. In the patient sample because of homozygous deletion, no peak is observed while in...

23 February 2021 5,645 1 View

How can I retrieve FASTA sequence from gene ID or UID of a Gene ? I have GeneBank IDs ?

I treid to use Entrez Batch, but it redirects me to NCBI site. Is there any script of Linux or Python through which I can download Fasta sequence of list of gene ID ?

21 February 2021 7,783 12 View

Not able to charge-discharge Li-ion coin cell at higher C rate ?

I am working on cathode material. I have made different Li-ion coin cell against Li metal using commercial available cathode materials such as LCO,LMO, LFP and NMC and also with the lab...

18 February 2021 1,450 3 View

How to estimate the error in the measured flow field by S-PIV?

qq

12 January 2021 8,271 3 View

Fluent simulation gets diverged in Batch Mode but converged in GUI mode?

Hi, I did a combustion simulation using the species transport model in my PC where Ansys 2020R2 is installed. I used a Chemkin mechanism and Chemkin-CFD solver for the chemistry part. The...

20 December 2020 168 2 View

Is it any standard method to preparation of active layer materials (blend donor & acceptor ) for organic bulk heterojunction solar cell ?

Hello friends , when I prepare blend donor and acceptor for active layer of organic solar cell I am take donor and acceptor in 1:1 ratio and concentration variation between 10mg/ml to 16mg/ml. I...

16 December 2020 3,876 4 View

How should I design electrodes for electrical stimulation on hydrogel ?

I would like to design custom setup for delivering electrical stimulation to cells cultured on electroconductive hydrogels. I am thinking to use standard tissue culture well plates (12 or 6 well...

26 October 2020 1,099 2 View

Can reduced particle size increase solubility ?

I'm trying to make Nanostructured lipid carriers (NLC) using ultrasonicator method for cancer meds that are hydrophobic and insoluble in water. I'm heating solid and liquid lipid phase and then...

21 October 2020 9,081 5 View

Please suggest any user friendly pipelines for the computation of Polygenic Risk Scores (PRS) on Microarray datasets?

I want to analyze the PRS scores for my microarray datasets, but want to use a platform which is a bit user friendly. Please suggest for any pipelines available.

06 October 2020 5,691 4 View

What is Zero air generator?

I want to purify NOx gas. Reported data shows that to achieve adsorption desorption equilibrium first we have to mix both gases.

05 October 2020 6,020 3 View

How to fix the voids on a floodplain map by using HEC_RAS model?

24 January 2021 9,054 2 View

How the precipitation Ratio and flow Ratio effect the output of the result?

I am doing HEC HMS calibration than i want to increase simulated value and volume of the computed so that my issue is how the precipitation and flow ratio make influential that result?

22 January 2021 152 2 View

Can anyone please tell me, what will be the Crop Coefficient value for shortleaf pine and oak tree in HEC-HMS model simulation?

my study area located in the forest region having Shortleaf Pine and Oaktree, thus in the Canopy Method I am trying to get the Crop Coefficient value of these trees but did not get anything.

18 January 2021 9,789 1 View

HEC RAS: project file error?

When I try to create a new project file on HEC RAS, this message appears "title and file name must be specified", even when I have already specified them.

03 January 2021 5,618 2 View

How to download future precipitation data for years 2021-2030?

For my future discharge forecast in the calibrated HEC HMS model, i need the precipitation data of the future.How can i get this data in the daily timescale?

21 December 2020 8,928 5 View

How to perform snowmelt runoff modeling in hEC HMS?

My study area of rainfall-runoff modelling is in mountainous region and has snow cover. There is about 10 percent snowmelt contribution to the discharge of the river i am modelling. How can I...

23 November 2020 7,873 4 View

How to solve the longest flow path error in HEC-geo HMS?

I'm having issues running the Longest Flow Path tool in HEC geo HMS. Attempting to run the Longest Flow Path tool results in the following warning error message. The error is attached. All...

19 August 2020 9,365 4 View

How can i classify these soils obtained from SOTER database to different Hydrological soil groups reguired in HEC HMS CN method??

I dont have any other soil maps for my study area.. How can i use this data to convert it into Hydrological soil groups A,B,C or D ?

04 August 2020 7,848 6 View

How do I determine the correct ratio to peak value for the Recession baseflow in HEC-HMS?

I am wondering if there is a way to estimate the ratio to peak value without calibration? What would be the most suitable value if I don't have a measured hydrograph to compare? Thanks for any...

27 July 2020 2,242 1 View

How do I estimate initial baseflow for each subbasin (HEC-HMS) ?

I have one hydrograph close to the watershed outlet from which I can extract a baseflow value. But what values would I assign to all the other subbasins? The HEC-HMS user manual says the...

21 July 2020 5,431 3 View