Electroless Ni/ Immersion gold plating solder

09 August 2013 1 444 Report

Does anyone know of any literature on Electroless Ni Immersion gold soldering using Pb containing solders.

Badges
Science topic

More Javaid I Qazi's questions See All

What may be the effective strategy to design primers of miRNAs for qRT-PCR?

I designed Primers for miRNAs using mirPrimer algorithm. However when l analysed them by Oligoanalyzer 3.1, it shows Primer-dimer and secondary structure formation. I request your suggestion...

19 September 2020 4,149 3 View

Why there is continuous need to genetically engineer a yeast that is already an industrially high-yielding strain??

It is generally observed that scientists and researchers worldwide always try to genetically engineer wild-type hyper-producer (high-yielding) strains that already produce enough/excellent...

31 August 2020 4,104 3 View

Chemical absorption Co2 removal technologies?

Dear All, Can Any one list down commercially available chemical absorption technologies which can be used for absorption of CO2 from syntehsis gas

17 August 2020 627 2 View

Isolating Total RNA from Paraffin blocks by TRI reagent?

Dear All, I got 2 weeks old paraffin blocks of tumor masses. I want to extract total RNA from them. The available reagents in my lab are: 1) Cell dissociation buffer (GIBCO#13151-014) 2) TRI...

30 March 2020 5,067 5 View

Differences in Load controlled and displacement controlled conditions ?

Why is that load controlled and displacement controlled boundary conditions give different results for same meshing and boundary restraints ? I specify time at the end of load step as 1 and no of...

13 February 2019 8,670 6 View

Selection of node from a subset of nodes corresponding to maximum displacement in one direction?

How to select a node from a set of selected nodes and get the node number corresponding to maximum value of say y displacement. It should also take the mod (for selection of maximum negative...

27 January 2019 5,097 1 View

For Immunofluorescence, Which dye is suitable in secondary antibody if your cells are GFP positive?

My cells are transfected with GFP plasmid. I want to detect a particular cell surface marker by immunostaining. Can I use Alexa Fluor 488 dye containing secondary antibody? Will it overlap with...

27 September 2018 4,502 6 View

How to SELECT THE keypoints associated with area numbers in APDL?

I have selected a subset of areas by ASEL,S,LOC,Y,0 APLOT With the selected areas I have counted them via *GET,A,AREA,,COUNT then I have defined an array via *DIM,B,ARRAY,1,AREA This creates an...

22 July 2018 4,456 4 View

How to combine result of excitation and emission radiations detected by microplate reader as one reading?

I did ROS assay using H2-DCFDA but could not find the function of detecting 2 wavelengths ( ex: 485, em: 520) at the same time as single reading in microplate reader so I got readings separately...

01 July 2018 6,590 5 View

Does heat Inactivation surely inactivate the restriction enzymes?

After digesting vector with AsiSI and NotI, I gel purified and quantified. The insert was PCR amplified, gel purified and cut with same enzymes. After cutting insert, I did not gel purify but heat...

04 June 2018 8,682 7 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

Is anyone familiar with the cyclic compressive fatigue testing (BS EN 12697 - 25) ?

I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...

28 February 2021 2,004 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

How to calculate Z (the number of molecules in a unit cell) for calculating theoretical density?

I am trying to calculate the theoretical density of my ceramics materials. I use the formula below to calculate the theoretical density: Theoretical density = (Molecular weight x No. of molecules...

24 February 2021 3,823 2 View