Hi,
Anyone knows where I can get sample EV's drive cycle data like mentioned in the picture ? I will need time,current,voltage values.
Check this links maybe help you
http://www.kones.eu/ep/2012/vol19/no4/207-222_J_O_KONES_2012_NO_4_VOL._19_ISSN_1231-4005_Gis.pdf
https://www.researchgate.net/publication/3735510_Dynamic_driving_cycle_analyses_using_electric_vehicle_time-series_data
Hi Praveen,
We did the same thing that you need. Please study our paper:
Article A Time and Energy Efficient Routing Algorithm for Electric V...
Hi, At 1C-rate, I am doing OCV test on A123 li-ion cyclindrical cells to measure capacity & internal resistance. At the end of discharge cycle how long is the pause time after which I can...
07 August 2018 8,447 2 View
I am performing EIS (BRS Messtechnik, galvanostatic) on cyclindrical A123 26650 LFP full cell. After setting SOC it is required to wait for some hours before carrying out EIS. I know it is to...
05 June 2018 8,968 0 View
Hi, I have 9 26650 LFP cells connected in series and impedance is measured one after the other using BRS EIS device. Currently I have soldered the batteries, but the EIS spectra is not a good...
04 May 2018 5,301 0 View
I have set of Electrochemical Impedance spectroscopy data of Lithium ion full cell (26650). Then I do Kramers-Kronig fitting using Lin tool of KIT. But this tool allows one cell after another...
03 April 2018 7,582 0 View
Hi, file='Data.xlsx' M=xlsread(file) Now I want to create a text file of the same name as in the excel name fileID=fopen() Can anyone tell what command comes here ? like sprintf or something...
03 April 2018 6,212 6 View
Hi, I have about 100 excel.xlsx file and wanted it to read with some Scilab xls or csv function. I could read this excel xlsx format. Also I don't want to use the import data format as I have...
03 April 2018 1,239 0 View
Hello, I have 100*10 matrix. I don't need the first 13 rows (they are strings). I need all data from 14th row. One columns (6) contains string which I don't need. Can anyone tell me how to read it...
03 April 2018 8,592 0 View
Hi, Similar to Matlab xlswrite(filename,A), what is the function name in Scilab to write on a new excel file ? I tried searching, but couldn't find out. There was only write_csv...
03 April 2018 5,395 2 View
Hi, I have matrix 'x' (see pic) with 5 values. Out of those one value deviates from the rest. So when I take the mean, standard deviation and plot with errorbar in Matlab, the deviation seems to...
02 March 2018 271 3 View
I am using equivalent circuits to fit 26650 LFP's current pulse measurements. We know that as temperature increases, the resistance decreases because of the ion's mobility. But at the same time,...
02 March 2018 109 9 View
In physics, the description of the properties of light generally refers to its wavelength (nm), while in the range of microwaves and radio waves we refer to the frequency of a signal (e.g. kHz or...
03 March 2021 1,682 3 View
I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...
03 March 2021 4,116 4 View
Light is inevitable for the process of photosynthesis reaction. Naturally sunlight plays the vital role for this process. Light may be of different colours like white, red, yellow, blue etc....
02 March 2021 7,890 2 View
My study consists simple corrosion inhibitors in salty brine. Right now I just fit my circuit with randles with CPE. Just wondering how the slop can given more info of the experiment. Or any...
01 March 2021 6,474 3 View
I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...
01 March 2021 9,701 5 View
Dear Researchers I am trying to perform a PIL simulation using STM32F4 Discovery board and comunication serial USB TO TTL. During simulation I receive the following timeout error: An error...
01 March 2021 2,327 1 View
The following code (see 1st 2 images attached) is used to produce PID controller values that are designed to control the system (G). The code finds the PID controller values (noted as k) by using...
28 February 2021 6,560 14 View
I have designed a 24 GHz rectangular antenna on HFSS 3D model and got desired results while desing the same antenna with same dimensions I am getting resonance frequency at 27 GHz I am...
28 February 2021 4,426 2 View
I have input and output data set for "ANFIS modeling in MATLAB", and I am getting some negative predicted values of output in testing. However, the predicted values of output in training are...
28 February 2021 3,459 3 View
When you observe the presence of Tyndall in an inflamed eye: Does each of the small floating dots correspond to an individual cell or to an aggregate of cells? Does a conventional slit lamp have...
27 February 2021 6,326 2 View