Dynamic mechanical relaxation in metallic glasses

More Mohammed Ilhami's questions See All

Is skin yellowness an numerical or ordinal variable?

I have a response variable called skin yellowness, which I will measure via a scored color chart, whereby 1 is pale yellow and 15 is orange. I'm not sure if this counts as an ordinal variable,...

11 August 2024 4,793 1 View

• What the possible Persistent Organic Pollutants and Heavy metals present in fluorspar, sediments, and water bodies around its mining area?

Approximate concentrations are require in compared with the WHO permissible limts

11 August 2024 2,723 1 View

How can I get old refernce in geomorphological mapping?

how can I read Waters, R. S. 1958. Morphological mapping. Geography 43 :10-17 from internet? note: not in google or resaearch gate

26 July 2024 7,813 3 View

How can the rubber fibres produced by the electrospinning device be removed from the fibre collect(aluminium foil) ?

How can the rubber fibres produced by the electrospinning device be removed from the fibre collector (aluminium foil) without affecting the orientation of the rubber fibres for use in reinforcing...

26 July 2024 8,281 0 View

My question concerns MTT cell viability assay?

Despite not having cells in the media, I am getting purple color. I have tried many troubleshooting methods, varying media types, and even different MTTs from different companies to figure out the...

21 July 2024 9,914 1 View

What are the modern topics to work under bacteriocin and fermentation as PhD student?

As PhD student specialized as food and industrial microbiology need to further research on bacteriocin and fermented food.

16 July 2024 7,394 1 View

How to get a research question in educational administration and management in MPhil?

What are some of the areas to consider in undertaken research in educational administration in MPhil.

14 July 2024 8,394 2 View

How can i elucidate a compound using xrd?

XRD analysis

08 July 2024 977 4 View

How i can calculate mathematically COD concentration if i add 1gr from glucose to 1 L distilled water ?

how i can calculate mathematically COD concentration if i add 1gr from glucose to 1 L distilled water

08 July 2024 9,104 2 View

What is the best method for modeling the transmission and reflection of an electromagnetic wave incident on a magnetic multilayer thin film?

Previously, I successfully modelled the transmission and reflection of electromagnetic waves incident on non-magnetic materials. Please refer to my publications for details: 1- A polynomial model...

05 July 2024 1,396 2 View

Fabrication of narrow glass capillary (inner diameter 200~500 nm)?

I need a very narrow glass capillary for my research. How can I make a glass capillary with an inner diameter of around 200 to 500 nanometers?

08 August 2024 8,915 0 View

How does grain and grain boundary affect the ceramic when studying its dielectric properties?

I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...

07 August 2024 5,177 3 View

Masonry Interaction Module ABAQUS?

I am simulating interlocking / dry stacked masonry in Abaqus. I am using a friction coefficient of 0.6 for my model as it is stated in the previous research as well as in the base paper. The...

16 July 2024 5,047 0 View

Does the potentiostat have to be in a fume hood when polymerising the PANI?

I will polymerise Aniline on ITO glass WE, using 1M of H2SO4 and a potentiostat. However, I am not sure if I have to do the electrochemical polymerisation inside a hood. Is it necessary? Is the...

10 July 2024 2,937 3 View

Where to source glass rings compatible with cell culture?

Hi all, I am looking glass cilinders that have an open flat bottom and top. Preferably with the inner diameter in the range of 2 cm. It's similar to the ones found on multi-electrode arrays for...

06 July 2024 5,846 1 View

What is alternative for PMMA?

If we want to introduce a material similar to polymethyl methacrylate "with the characteristics mentioned in the next paragraph" that can be added to a precursor and create a composite, which...

03 July 2024 2,371 1 View

Why PDMS is not hardening ?

I use PDMS to build a microfluidic system, but it is not hardening at all, although I use TEOS as a cross-linker and also ATPES in a ratio of 1:10, and it's been 3 days at 80 degrees of 3 ml cast...

01 July 2024 604 3 View

To generate hydroxyl radicals the photcatalyst need to be in conatct with water or air pollutant?

Is direct contact of polllutant and catalyst needed? or indirect contact just like photocatalyst wrapped inside glass can also create hydroxyl radicals and elimnate pollutants near to its wrapped...

23 June 2024 3,249 5 View

What is the difference between creep deformation and stress relaxation ?

I understand the basic definition for both. I found a literature to describe both of them. In the paper, they states: If a stress is applied to a concrete body, the body experiences an elastic...

19 June 2024 525 3 View

Where can we get few mm diameter polished circular glass plates?

who retails few mm diameter polished circular glass plates ? thickness 0.1 to 1 mm diameter 1 to 3 mm ordinary or fused silica glass polished on both sides and the edge

16 June 2024 763 1 View

Pervaiz Ahmad

Dear Mohammed Ilhami

Please refer the following article regarding your quires:

Article Atomic mechanism of internal friction in a model metallic glass

Mohammed Ilhami

Thank you Pervaiz Ahmad for your recommendation. I have already read it and I am getting inspiration from this article.

Fatma Zohra Benabid

Recommend