Does the electrochemical removal of arsenic from water follow a second order equation?

09 September 2017 0 5K Report

Does the electrochemical removal of arsenic, using Al electrodes, from water follow a second order equation?

Badges
Science topic

More Khalid Hashim's questions See All

What is the possible reactions between Reactive balck 5 dye and natural organic matter?

Please, could anyone provides me with a reference about the possible reactions between reactive black 5 dye and the natural organic matter in deionised water?

09 October 2017 1,754 6 View

What is the best method to measure phosphate concentration in water samples?

I worked on phosphate removal from water using the electrocoagulation method. I used standard Hach-Lange cuvettes to measure the residual phosphate concentration. Any other reliable method please?

08 September 2017 1,725 17 View

What is the possible reactions between methylene blue dye and natural organic matter?

Please, could anyone provides me with a reference about the possible reactions between methylene blue dye and natural organic matter in deionised water?

08 September 2017 3,773 0 View

What is the best method to check the influence of each single parameter on a statistical model?

I working on the development a statistical model to reproduce the performance of an EC reactor. I need to assess the influence of each single parameter, to do so, I used the Beta coefficient. Dose...

08 September 2017 1,378 15 View

Relationship between BOD and COD

Hi all, does anyone know a reliable equation to calculate BOD from COD please?

05 June 2017 2,119 4 View

Dear all, is Johnson Transformation applicable for all types of data please? Could we use it to normalise all types non-normal data?

it is a function in the Minitab

05 June 2017 671 7 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,624 3 View

How to find a reaction is reversible or irreversible in CV? How to know the number of electrons transfer?

My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...

30 July 2024 4,671 3 View

How to check pH of a high strength hydrogel?

We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...

30 July 2024 942 2 View

While doing Chronoamperometry, when the light is turned off, why the current is not decreasing sharply?

Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.

29 July 2024 4,538 3 View

Why semicircle of nyquist plot is not complete?

While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...

26 July 2024 7,542 4 View

Why do these abnormal charge/discharge curves of coin cell batteries appear?

As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...

24 July 2024 6,930 1 View

How can I measure arsenic concentration in a patient blood?

I intend to get an economical and accurate LAB TEST to measure arsenic concentration in blood sample.

23 July 2024 3,654 2 View

What binder would be the best choice to modify glassy carbon electrode with a 2D Material like Graphene or MXene?

I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?

23 July 2024 5,776 2 View

I obtain two plateu instead of one in LFP cathode assembled with graphite anode in 1M LiTFSI in DOL/DME, what does this mean?

I have attached the charging curve from the battery tester for review. I need help on what is happening

21 July 2024 6,898 2 View