I am studying the decomposition of multilayer packaging wich are composed by LDPE/LLDPE/EVOH/PA-6 , I have pure LDPE and pure LLDPE, but I don't have pure PA-6 nor EVOH, so I would like to know if someone here could share with me the TG/DTG data of that polymers, because I need it for my calculations.
Also if someone have the TG/DTG of a blend LDPE/PA-6 with a known composition, it would be very helpful.
(My temperature program is: from 30ºC to 600ºC in atmosphere of N2 with a flow rate of 50mL/min).
Hi,
Please check figure 1 in this article.
http://www.doiserbia.nb.rs/img/doi/1451-9372/2011/1451-93721000064P.pdf
Dear German Araujo,
I have attached herewith the Articles for your reference, which deals with TG/DTG PA-6 decomposition data.
Kindly go through the same.
Article Thermal decomposition behavior of polyamide fire-retardant c...
Article Thermal Degradation and Fire Behaviors of Glass Fiber Reinfo...
I hope I have answered your question.
With Best Wishes,
Samir G. Pandya
Look at https://www.fire.tc.faa.gov/pdf/05-14.pdf
Td = 424°C (onset) and Tp = 454°C (maximum mass loss)
Look at https://www.fire.tc.faa.gov/pdf/05-14.pdf
Td is 424°C (onset) and Tp is 454°C (maximum mass loss)
Td is 424C (onset) and Tp is 454C (maximum mass loss)
https://www.fire.tc.faa.gov/pdf/05-14.pdf
- Badges
- Science topic
- Similar topics
- Physical Sciences
- Materials Science
- Materials
- Polymers