Does anyone know refractive and absorption of graphene in microwave?
Dear Mehdi,
This article on visible light response should make for a good starting point: Ruoff, Rodney S. et al "Simple Approach for High-Contrast Optical Imaging and Characterization of Graphene-Based Sheets." Nano Letters (2007), 7(12), 3569-3575
You can download the PDF directly from:
http://bucky-central.me.utexas.edu/RuoffsPDFs/168.pdf
I suggest looking at articles citing this one for information on microwave properties specifically.
Dear Toma
thank you very much, i will read it
Refractive index of graphene oxide in thin film.
09 October 2014 8,307 7 View
I want deposit graphene oxide on glass or quartz. How can Ii stable it on glass?
09 October 2014 8,715 4 View
im working now on TPV solar cells and metamaterials and i realy need our help in CST microwave i have a tpv cell simulation and i want to extract particullarly the absorbtion of only the active...
02 March 2021 2,246 2 View
Working on chandrayaan-2 DFSAR data, there are three datasets available: 1) Slant range image data product: The slant range complex image file. Each pixel is represented by two 4-byte floating...
02 March 2021 8,481 3 View
In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...
01 March 2021 2,207 3 View
I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?
01 March 2021 930 3 View
Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.
28 February 2021 3,640 3 View
Hello everybody! I have a problem with developing a compact antenna for the 1MHz-5MHz frequency range. Tell me what type of antenna can be used and what books and articles to read to perform this...
27 February 2021 7,710 4 View
I am simulating helix antenna in hfss, right now, giving excitation with 50 ohms port. When I see the results of Z parameter (real). It shows lower than 50 ohms. Do not understand, if it can be...
27 February 2021 4,218 7 View
I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...
26 February 2021 9,580 4 View
How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?
23 February 2021 3,053 7 View
I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...
23 February 2021 4,155 4 View