Does anyone have a good idea about external cavity laser simulation on Silvaco?

04 April 2019 1 4K Report

I have started by this example provided by Silvaco: laserex13.in : Front Mirror with Tuning Air Gap and DBR Rear Mirror -without changing any part of the code- but when I tried to run this example this error has appeared: Error :" Memory allocation failure. Try killing processes or see system administrator." once the simulator reaches certain bias value.I thought it is due to my memory(8GB) but when I use another PC (32GB) the same error still appears!

Isam Eldin Hussein Elgailani

Please look at the following below links which may help you in your analysis:

https://www.silvaco.co.kr/products/tcad/device_simulation/atlas/atlas_32.pdf

https://cloudfront.escholarship.org/dist/prd/content/qt3dp701hk/qt3dp701hk.pdf

https://perso.esiee.fr/~polleuxj/Documents/atlas_users.pdf

Thanks

Badges
Science topic

More Sara Al-Khodary's questions See All

How to solve "Signal SEGV" error while trying to save spectrum files?

I am working on laser simulation on Silvaco/Atlas. The code I am using is provided by silvaco in the examples (laserex13 ) that implements external cavity. I have changed in the code to make the...

04 May 2019 8,033 3 View

Which personal pronoun is appropriate in single-author papers?

Which personal pronoun is appropriate in single-author papers - 'I' or 'we'? For example: "In this paper, we will explore..." or "In this paper, I will explore..." . Thanks.

01 February 2019 2,179 7 View

No title

BacMam is discontinued, and the isolated sheep heart cells that we have used are not working. We are getting 4.4 RFUs when we should be getting in the 1000's! Your assistance is kindly appreciarted

02 March 2016 8,501 0 View

Can you culture cardiac myocytes on a bed of agarose gel?

I am interested in growing a cardiac myocytes monolayer on a bed of agrose gel to be later used for a heart contractility simulation assay. Any ideas on how to go about doing that? More important...

08 September 2015 4,694 4 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

Why do the air flow results vary totally when adding scalar in CFD ?

Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...

25 February 2021 9,602 4 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

Are these moths Spodoptera frugiperda?

The caterpillars of the moths were collected as fruitborers in pepper at a farmer. I reared them till the adults hatched and compared them with pictures and descriptions on the internet. Are these...

24 February 2021 7,785 5 View

Is is possible to pole with corona poling pellets of the sample material instead of thin films?

As it is highly probable that pellets will have a higher degree of air gaps and voids than thin films, is it possible to pole the samples with corona poling nevertheless? Or is there the...

24 February 2021 1,349 1 View

How to troubleshoot Electrochromic Films and Electrochromic Devices?

I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...

23 February 2021 9,592 2 View

Have you ever experiencing air vent trouble in fermentation process?

Dear all, My research group is currently working with a 12-litre fermenter. Somehow, if we do the fermentation for more than 20 hours, the process will be more prone to contamination. Our current...

23 February 2021 1,908 2 View