Dear all,
One student made a work with IEEE reliability test system with 24 busbars according the data from the paper of our best experts in that field. The file is in attachment. Where can results be checked and confirmed?
Complete data and results can be verified with MATPOWER. Power flow results are attached.
Thank you Saran
We have PF results but we need reliabilty indices, summary, load point and busbar-node indices.Also system HLI level for LOLP, LOEE, ENS. We had used and get results with DIgSILENT Power factory program-reliabiliry module and generator adequacy module.
Srete
The results are calculated by a proposed program that is validated
LOLE = 9.2373 hr / year
LOEE = 1156.9137 MWhr / year
The errors in the Monte Carlo simulation are less than 5%.
Thank you Duarte
My student do not get similar results, since It depends on loads and generator FOR. Do you have maybe a DIgSILENT file in "dz" or new "pfd" formt in 14 or 15 version?
Srete
I can send you pfd DIgSILENT file but you need to check it. It passed us the load flow and reliabilty analysis but I was not satisfied with result since we had not get the same as in one Journal paper.
Srete
Yes I will tomorrow from faculty since it is night here in Croatia.
Dear Hasan
Please check it all data. It pass us load flow and reliability analysis but DIgSILENT has i tricky in reliability analysis it does not considered generators outages so we put their data on their connected busbars.
In Generator adequacy it can model generators states , probabiliteaand times as well as maintenance of them. This method works on Monte Carlo principe
I hope it will help you
Srete
Hi Srete Nikolovski,
Could you provide me the exact data for load flow analysis in IEEE-24 BUS System(i.e.,Line Data and Bus Data).
Hi Srete Nikolovski,
The system in digsilent does not have the same parameters in generation, could you correctly simulate the power flow?
- Badges
- Science topic
- Similar topics
- Biological Science
- Physiology
- Physiological Processes
- Stress