Generators are rated power from 3-50 MW. In attachment is one test diagram for 5 MW generator
Dear sir,
The following reference presents typical gas turbine starting characteristics
https://powergen.gepower.com/content/dam/gepower-powergen/global/en_US/documents/technical/ger/ger-3658d-speedtronic-mark-v-gas-turbine-control-system.pdf
Thank you Gabriel. Are any data about steam turbine ?
I found two references with considerations about starting characteristics of steam turbines.
http://www.energy.siemens.com/br/pool/hq/energy-topics/pdfs/en/steam-turbines-power-plants/USCSteamTurbinetechnologyformaximumefficiencyandoperationalflexibility.pdf
http://yadda.icm.edu.pl/yadda/element/bwmeta1.element.baztech-484a0f98-081c-46a9-8716-cb06f56ffc03/c/Trans169-198.pdf
Dear Gabriel. Thank you
That is it. I have found answers on Fig 11 in the first and Fig 12 in the second paper which confirm our measurements for 5 MW steam generator which time was 40 min.
Srete
Has anybody information of Chinese product "Growatt 80KTL3LV" inverters and which algorithm is used for and islanding detection. ( I know all about passive method in it U and f ... ) Are any...
02 May 2021 4,023 2 View
Since nobody answer me does DIgSILENT in new versions 2017-2018 has UPFC element, do any other software have it? Or can UPFC be arranged with DIgSILENT AC/DC converters and DC/AC inverters?...
10 September 2018 7,275 5 View
Please does new version of DIgSILENT versions 2016-2018 (We have 15.1. ) has element model of UPFC in transmission networks?
05 September 2018 7,331 2 View
Dear all, One student made a work with IEEE reliability test system with 24 busbars according the data from the paper of our best experts in that field. The file is in attachment. Where can...
16 November 2016 4,538 11 View
I am interested in distant homology, and the PSSM alignment is not good enough for that.
09 September 2015 6,577 3 View
Does anybody know some link on free software for calculation of induction motor parameters from rated- nominal parameters (voltage, power, power factor, moment of inertia-GD2)?
30 May 2015 7,141 5 View
Has anybody experience with setting of Out-of Step protection for SIEMENS 7UM621 numerical relay. Is it enough to model eqiuvalent impedances only serial components generator-trafo-line-network or...
16 April 2015 1,110 2 View
Can you in your simulator get solution that generator detects lost of mains or islanding with balance of active power P = 0 and AR- automatic recloseing happens on network breaker with open time...
01 January 1970 6,338 1 View
What is the best way (and software) to graphically present multivariate regression analysis results? Both of my predictor and outcome variables are dichotomous and are coded with 0 and 1. I...
01 January 1970 6,386 12 View
Could you recommend some articles on Urban Transportation System optimization and Innovation?
13 August 2024 2,595 3 View
I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.
11 August 2024 9,101 4 View
I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?
11 August 2024 5,138 1 View
Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!
11 August 2024 3,770 4 View
Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...
10 August 2024 7,180 0 View
I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...
10 August 2024 7,429 2 View
How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?
09 August 2024 7,718 0 View
Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...
07 August 2024 1,937 1 View
A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.
07 August 2024 5,307 1 View
I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...
07 August 2024 5,177 3 View