I would need mainly models that make use of real data at the local or regional level and firm-based, but any reference would be welcomed. Thanks!
Not exactly what you asked for, but maybe it can lead you the way: http://www.sciencedirect.com/science/article/pii/S0048733313000498
Try this one: . DOI: 10.1109/ICSMC.2010.5641874
Take a look on this one , here in researchgate. If you cannot download it from Inderscience I can send you copy.
Article Explaining and predicting the impact of regulation on innova...
Thank you for your answers, they are really good starting points. Carlos, my university doesn't have access to the document, I requested it to you
The golden rule for integrating real data in agent based model is here
http://www.economicswebinstitute.org/essays/consumers.htm
It has been considered as a major future orientation for abs by Brent Zenobia
https://www.researchgate.net/publication/245131713_Artificial_markets_A_review_and_assessment_of_a_new_venue_for_innovation_research
For a paper on demand trend influence on innovation trajectories of heterogeneous firms see here:
http://www.economicswebinstitute.org/essays/fixedvar.htm
For an agent based model with innovation, finance and advertising see here:
http://www.economicswebinstitute.org/essays/dyncomp.htm
If you are interested in getting the code and discuss how to include real data into such models, feel free to contact me.
Article Artificial markets: A review and assessment of a new venue f...
I came acros the SKIN project recently, maybe this is of help for you:
http://cress.soc.surrey.ac.uk/SKIN/home
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
Hello all, I have been trying to follow a 2-stage PCR protocol used to amplify barcodes of a large yeast library, as per Nyugen et al. (2022) -...
30 July 2024 841 2 View
When I run autogrid4 it says: autogrid4: ERROR: Unknown receptor type: "Cr" -- Add parameters for it to the parameter library first! Look forward to your reply.Thank you so much!
29 July 2024 488 0 View
Contemporary scores or innovations in scientific approaches. Hybrid methodologies, emerging themes and cross-cutting issues?
27 July 2024 648 3 View
I don't have the anaerobic generators (Anaeropac) so I'd like to try the candle-jar tecnique for the cultive of lactic acid bacteria
15 July 2024 8,890 2 View
Hello everyone, I am facing a consistent issue in my NMR spectra with an unwanted peak appearing at 1.25 ppm. This peak seems to vary with the amount of sample: it becomes more pronounced with...
15 July 2024 9,065 4 View
I'd like to know if anyone has got experience in intracerebroventricular (ICV) AAV inj. I am looking for a concomitant spread of the AAV including but not limited to the motor cortex and the...
12 July 2024 781 0 View
I need tips for isolating Ralstonia solanacearum from eucalyptus. I have used some methods, such as isolating from root exudates, but it didn't work. I also tried indirect isolation from macerated...
02 July 2024 9,807 3 View
Kindly provide their URLs. Thank you
30 June 2024 8,475 0 View
I have been working in Hanoi University of Public Health. I would like to know where and how I can buy AMOS software?
28 June 2024 6,593 1 View
I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?
11 August 2024 3,115 1 View
I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...
10 August 2024 4,005 2 View
Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...
09 August 2024 7,892 0 View
I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...
09 August 2024 5,048 2 View
I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...
08 August 2024 719 0 View
Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...
06 August 2024 9,986 2 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
Dear readers, Thanks for your attention. I am wondering about the health economic problem of quantifying the value of interventions which a) prevent, b) improve symptom profile and c) ultimately...
05 August 2024 3,246 1 View
I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...
05 August 2024 3,665 0 View
I am working on a SEM model where i have 7 latent variables (6 exogenous and 1 endogenous). In AMOS when I co-vary the exogenous constructs, only 2 paths are coming significant out of 6. But when...
03 August 2024 6,028 4 View