I am developing platinum electrodes modified by strands of DNA, and I am confused between the acivity of the plane (111) and (100).
Hello Chtaini Abdelilah
I would suggest to read this question below that I asked a few weeks ago. Maybe you could find what you are searching for or find the best person to ask from.
https://www.researchgate.net/post/Considerations_when_moving_from_disk_electrodes_to_screen-printed_or_microfabricated_electrodes
@Martin Peacock is always very helpful on that type of subject.
Best regards,
Marie B.
OK, thank you
Fuel Cells
02 March 2017 1,600 0 View
DNA Film
02 March 2017 7,826 0 View
the organic molecule is inserted in the working electrode
06 July 2015 5,228 0 View
I am having some difficulties preparing NiO steel samples by the electrochemical method.
10 November 2014 6,381 3 View
ADN modified electrode.
09 October 2014 2,942 2 View
I find it hard to improve the activity of Ni for the oxidation of ethanol
05 June 2014 2,851 0 View
Already thought of self-assembly, but the sillice is a bit complicated
05 June 2014 7,205 0 View
How can we estimate the electrocatalytic activity of phosphate in methanol oxidation?
02 March 2014 3,344 2 View
The prepared electrode was tested for ethanol fuel cell
02 March 2014 933 2 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
i am facing the difficulty to find the right and latest topic for my thesis. i searched and read hundreds of articles but i couldn't find the right one. what can i do I'm really confused.
02 August 2024 1,323 8 View
My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...
30 July 2024 4,671 3 View
We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...
30 July 2024 942 2 View
Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.
29 July 2024 4,538 3 View
While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...
26 July 2024 7,542 4 View
As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...
24 July 2024 6,930 1 View
I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?
23 July 2024 5,776 2 View
I have attached the charging curve from the battery tester for review. I need help on what is happening
21 July 2024 6,898 2 View