because both will act as to improve organic carbon in soil
No
My primers are designed to yield 1400 bp fragment. But on the gel after PCR, I am getting sharp band at 1000 bp and faint band at 1500 bp. What are the troubleshoot options that I can apply to get...
02 April 2024 609 0 View
Moderated Mediation in SPSS using Hayes Process Macro Model 59
05 February 2024 4,202 4 View
I am working on an enzyme production in submerged fermentation. I already have some data available from my previous batch. They have worked with 5 different variables (substrate concentrations) to...
29 October 2023 7,078 0 View
CFA Modification indices threshold for large sample
18 October 2023 1,792 3 View
My model fit indices as mentioned above for the sample size of 600 is more than 0.8 but not meeting the rule of thumb of more than 0.9 value can this value be considered and what are the ways to...
14 August 2023 1,302 4 View
Hi everyone I am currently investigating the effect of iron deficiency on neuronal cells (SHYSY5Y to be exact). For this, I need to create an environment of iron-depletion in-vitro. While past...
27 June 2023 1,888 0 View
I have been trying to simulate C-V plots in Silvaco Atlas for different dopants. I have specified the dopant as Indium while specifying the doping, and Silvaco is also not giving me any errors....
22 November 2022 1,792 0 View
I have a set of frozen mammalian brain and lung samples which I need to screen for RNA viruses. I have seen some protocols e.g. mag max core kit (MagMAX™ CORE Nucleic Acid Purification Kit Catalog...
01 September 2022 2,617 1 View
I'm trying to model the depletion width of a MOSFET at cryogenic temperatures. I would like to see the depletion width in MOSFETs directly in the TCAD software. Any help would be appreciated.
04 July 2022 8,855 1 View
I am working on cryogenic modeling of MOS Transistors and in that case I have to include incomplete ionization. That certainly puts E_A as a very important parameter. So I was just wondering if...
16 May 2022 5,126 3 View
Approximate concentrations are require in compared with the WHO permissible limts
11 August 2024 2,722 1 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,628 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 940 3 View
Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...
09 August 2024 5,439 7 View
How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?
09 August 2024 3,286 2 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,781 3 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,714 0 View
I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?
02 August 2024 7,185 6 View
The starting material is a finely ground powder. Some particles contain more graphene than others.
30 July 2024 3,977 2 View
I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...
30 July 2024 6,135 0 View
