I request the research community in the field of polymer design, modeling, and manufacturing that I would like to have the tensile, compression, and shear Stress-Strain curve data for Epoxy 3501-6 matrix material, widely used in the corban/epoxy unidirectional laminates.
Dear Dr. y.sharath chandra mouli,
your question is not a specific part of my research topics, but I believe you can take a look at the following possibilities:
- Is there a thickness effect on compressive strength of unnotched composite laminates?
I.M. Daniel, Hao-Ming Hsiao
International Journal of Fracture 95(1):143-158 (1999)
Available, on RG, at: https://www.researchgate.net/publication/226199735_Is_there_a_thickness_effect_on_compressive_strength_of_unnotched_composite_laminates
-Fatigue Behaviour of Hercules 3501-6 Epoxy Resin
Report of Mechanical Engineering Department – University of Wyoming (1980)
Available at: https://apps.dtic.mil/dtic/tr/fulltext/u2/a083494.pdf
- Failure of Composite Materials under Multi-axial Static and Dynamic Loading
Isaac M. Daniel
Procedia Engineering 88:10-17 (2014)
Available, on RG, at: https://www.researchgate.net/publication/277583464_Failure_of_Composite_Materials_under_Multi-axial_Static_and_Dynamic_Loading
Good work and best regards, Pierluigi Traverso.
https://www.researchgate.net/figure/Measured-shear-stress-strain-curve-for-carbon-epoxy-composite-IM6G-3501-6-and-graphical_fig16_226199735
Pierluigi Traverso two out of three references are on composite laminate data. While the second one is on Epoxy 3501-6 is of 1980. Moreover, they have given data for S-N curves in fatigue test.
I need if anyone is working on mechanical characterization of 3501-6 Epoxy in research times?
Dear Dr. Yenike Sharath Chandra Mouli ,
I only partially work about this topic; I'll try to ask some of my colleagues.
Best regards, Pierluigi Traverso.
- Badges
- Science topic