Determination of menthol using uv vis spectrophotometer?

01 December 2020 1 5K Report

Is there any procedure for the quantitative analysis of standard menthol (drug) in methanol using a UV vis spectrophotometer?

Thanks in advance.

Isam Eldin Hussein Elgailani

Please look at the following below links which may help you in your analysis:

http://www.bipcic.icpm.tuiasi.ro/pdf/2013/bipi_cic_2013_2_06.pdf

https://agris.fao.org/agris-search/search.do?recordID=YU2001000486

Thanks

Badges
Science method

More Steffi Shaji's questions See All

What might be the reason for obtaining two bands in plant genomic DNA extraction?

I got a thin band and a thick band i guess it would be the genomic DNA and the 260/280 ratio is 3.

21 February 2021 6,523 6 View

How to choose between using parametric and non parametric tests?

Eg: i have a values of WBC count and mortality (yes or no). I have about 120 test subjects. When checking mean WBC count, i find that the SD is twice or more than the Mean value. Is this a...

12 October 2016 5,317 5 View

How can you transfect exosomes obtained in vivo with microRNAs or antagomiRs for subsequent in vivo applications?

We isolated exosomes from culture supernatants using the ultracentrifugation method. Could anyone suggest how to transfect these exosomes and purify them for consecutive administration in vivo?

25 March 2014 766 3 View

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View

What is the indication of the absence of peaks in Methanol electrooxidation CV curves ?

I have several question regarding the MOR; hope anyone help me better understand. 1- in CV using (KOH+MEOH) what is the indication of absence of the redox peaks? shouldn't they exist as a sign...

28 February 2021 4,851 8 View

Why initial concentration of Pb not the same as calculated one when testing using AAS?

I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...

26 February 2021 9,580 4 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

How can I simulate the optical absorption spectrum of a biomaterial (like DNA or protein) in COMSOL?

I need to simulate the optical properties of a biomaterial, namely DNA, in COMSOL. Basically I need to simulate the IR absorption spectrum of a cylinder filled with a 'concentration' of DNA. I am...

21 February 2021 3,043 3 View

In methylene blue test Why is UV absorbance reading very low as soon adsorbent is added and then increasing before reaching equilibrium?

Hello, I'm working on removal of methylene blue. 01. in the dark test very first reading is taken 15 minutes after adding adsorbent to the dye solution and that UV absorbance reading is very...

19 February 2021 472 5 View

Can I measure absorbance efficiency with wavelength in a spectrophotometer?

I measure the wavelength of material in a spectrophotometer and it peaks at 275 and its absorbance is 100. I mix it with an adsorbent and it adsorbs the first material, but when I measure the...

16 February 2021 7,515 5 View

Unusually Busy Raman Background?

Hello, I am observing a nearly periodic background spectrum for a wide variety of SERS substrates. I see this response (attached below) for bare Au films, Cu films, and Au nanoparticles on...

15 February 2021 9,922 5 View

How to determine the drug loading and the drug release capacity of a polymer micelle using UV spectroscopy?

Currently, I am working on PLA-PEG copolymer micelle for the drug delivery system. I have seen several papers where some researcher talks to centrifuge the drug-loaded micelle to separate the...

13 February 2021 5,822 7 View