D and G band in CARBON DOTS observed at 1304 and 1441 cm-1 unlike 1348 and 1581cm-1. Can someone help me in knowing the reason behind this shift. I am attaching recorded raman spectra of carbon dots for reference.
Hello, I am interested in understanding the relationship between binding energy (B.E.) and ions' oxidation state (O.S.) in XPS spectra. Per example The core-level XPS of Mn2P in MnxNy can be...
21 December 2022 1,710 2 View
I have done a polymerization using toluene as the solvent, when I dried the precipitate it changes to black and sticky. can anyone suggest me a technique or any other method to get my sample as solid?
15 February 2022 2,689 5 View
Do we have to use both the ROX dye and SYBR while performing qPCR analysis?
08 November 2021 4,139 3 View
Hello! Hope you are doing good. I am a post graduate student from India, who has undertaken a research as part of my curriculum. My thesis research is about K-Pop fans and how being part of a...
12 September 2021 2,485 0 View
Initially the motor coupled to load with flexible coupling drive shows oscillations in shaft speed at both sides of the coupling . The flywheel at the non driving end of the motor is installed...
06 October 2020 3,190 2 View
I have used 300 oC as degassing temperature for BET analysis of clay nanoparticles, it got charred after degassing. Why does this occur?
06 June 2019 987 5 View
XRD peak of bare carbon dots coming at 19 degrees and surface functionalised carbon dots with hexadecylamine coming at 19 degrees and 20-22 degrees, can someone help me in analysing these peaks...
25 March 2019 1,265 5 View
I see circular rings in HRTEM image of carbon nano particles, Can someone tell me what does it represent?
18 March 2019 8,235 3 View
1.I want to know how to get Thai character numbers(0-9) dataset and train them and which deep learning algorithm is more efficient.
19 July 2018 2,399 2 View
softening behavior of rock
29 November 2016 8,113 5 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?
09 August 2024 3,291 2 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,716 0 View
The starting material is a finely ground powder. Some particles contain more graphene than others.
30 July 2024 3,978 2 View
I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...
30 July 2024 6,137 0 View
A computational study of heat flux on cylindrical surfaces using CNT hybrid nanofluids
28 July 2024 4,985 1 View
Is there a straightforward way to conduct a sensitivity power analysis for a Kendall's Tau correlation? I was considering using the sensitivity setting and "Correlation: point biserial model" test...
28 July 2024 6,133 8 View
While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...
26 July 2024 7,542 4 View
The resin bonded carbon containing refractories are aged before use. How time of aging is determined? And mechanism behind aging.
23 July 2024 3,205 0 View