No title

01 January 1970 7,446 0 View

How is the sulphur effect on properties of steel

How we can to detect sulphur on microstructure of steel. How to print sulphur's distribution on billets

01 January 1970 2,600 7 View

No title

01 January 1970 3,666 1 View

How to simultaneously perform multiple biochemical assays?

I am a research scholar working on heavy metal stress on plants. I will be doing biochemical characterisation( protein, carbohydrate, proline, antioxidant enzymes and many more assays) at interval...

01 March 2021 6,999 3 View

Why is NH4OH added in heavy metals limit test?

The limit test I'm referring to is USP method II. In this procedure you need to dropwise add 6N of NH4OH to the sample until it the pH is alkali. After that you need to dilute and add HOAc until...

23 February 2021 2,049 3 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

I want to simulate a system containing protein and heavy metals; which force field is most reliable for this purpose?

The protein I want to simulate has multiple heavy metals. I wanted to know which force-field I should use with GROMACS to achieve this. Most importantly, do the latest updates in the force-field...

16 February 2021 2,420 1 View

What can be use to mop up heavy metals from vegetables or soils in quarry mining site?

It has been established that quarry mining site polluted and contaminated it's environment with heavy metals, these affects the crops and vegetables planted in the area. The possible solutions to...

12 February 2021 1,155 5 View

Please how can i write a proposal on the methodolgies of AAS to determine heavy metalsin water?

Please I want to write a proposal on the methodologies of AAS to determine heavy metals in water. please any link can help.

08 February 2021 3,587 7 View

How to calculate the Boiling point for metals at high vapor pressure?

In our experiment, some metal surfaces are exposed to radiation heat under high vapor gas pressure. I would like to ask if there is any way to calculate the boiling point for metals under high...

31 January 2021 249 4 View

How can I prepare 300mg/L concentration of lead(II) nitrate ( Mol. Wt reffered is 331.21) incoorporated Luria-Bertani (LB) agar ?

I need to check the Heavy metal (lead) consumption assay using microbes at varying concentration in same media. ( 200mg/L to 2000mg/L).kindly help me to clear it.

19 January 2021 1,946 9 View

What is the kinetics that Cr6 on the surface of the soil will preferably exchange with the charge on the surface of the iron oxide nanoparticle?

I am researching the application of iron oxide nanoparticle in the removal of heavy metal (Cr6) from soil

10 January 2021 3,167 3 View

Does low pHPZC (Zero point charge) indicates higher negative charged surface ?

I found that, there is a difference in pHPZC value when higher impregnation ratio of acid on adsorbent surface. Lower pHPZC value when higher ratio of acid impregnation and adsorption performance...

05 January 2021 7,224 3 View