Are cerabone a/w and glass ceramic a/w the same material? Do they have the same properties?
advise work
17 April 2024 3,610 0 View
What are the mechanical properties of the maxillofacial material Tera Harz TC-80DP? What works contain such information? Thank you!
12 March 2024 3,732 3 View
They don’t always gather even when the weather changes.
17 February 2024 2,228 4 View
Is this dental material classified as ceramic? Does it contain hydroxyapatites?
31 January 2024 2,409 3 View
What works describe these methods? Thank you!
30 November 2023 9,989 4 View
Crowns made from Tera Harz TC-80DP material can be used to fuse with a tooth and subsequently replace it, like, for example, bone substitutes made from hydroxyapatite, or can such crowns only be...
01 November 2023 1,107 3 View
Please advise any work to influence the structure of the Tera Harz TC-80DP material. Thank you!
17 October 2023 8,978 0 View
What kind of material is Tera Harz TC-80DP for maxillofacial surgery? What is its composition? Where can I view SEM images of this material? Thank you!
15 October 2023 1,667 6 View
We need work where the structure of this material is affected, as well as the composition and sem analysis of this material. Thank you!
10 October 2023 1,481 1 View
Please advise resources where you can search for dissertations using keywords. We need sites where you can choose the type of scientific work (article, dissertation, etc.). Thank you!
08 October 2023 450 2 View
I need a very narrow glass capillary for my research. How can I make a glass capillary with an inner diameter of around 200 to 500 nanometers?
08 August 2024 8,915 0 View
I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...
07 August 2024 5,177 3 View
Does it exist some special technique for cutting ceramic membranes for Cross-sectional FESEM or SEM images?
25 July 2024 5,482 2 View
I will polymerise Aniline on ITO glass WE, using 1M of H2SO4 and a potentiostat. However, I am not sure if I have to do the electrochemical polymerisation inside a hood. Is it necessary? Is the...
10 July 2024 2,937 3 View
..
10 July 2024 3,444 4 View
as of my knowledge z90 is acrylic based sealant adhesive.
09 July 2024 8,660 4 View
Dear Prof, is there a subtle distinction between the terms "substitution" and "doping" when referring to modifying ceramic dielectric materials for example Na0.5Bi0.5TiO3? Is there any difference...
08 July 2024 2,043 3 View
Hi all, I am looking glass cilinders that have an open flat bottom and top. Preferably with the inner diameter in the range of 2 cm. It's similar to the ones found on multi-electrode arrays for...
06 July 2024 5,846 1 View
If we want to introduce a material similar to polymethyl methacrylate "with the characteristics mentioned in the next paragraph" that can be added to a precursor and create a composite, which...
03 July 2024 2,371 1 View
I use PDMS to build a microfluidic system, but it is not hardening at all, although I use TEOS as a cross-linker and also ATPES in a ratio of 1:10, and it's been 3 days at 80 degrees of 3 ml cast...
01 July 2024 604 3 View