Can you recommend a supplier of 'Giant' Electrorheological Fluid?

More Nicholas Charles Lee's questions See All

Could you recommend some articles on Urban Transportation System optimization and Innovation?

13 August 2024 2,595 3 View

Does anyone know what might be causing the smeared bands on my western blot?

I got these smeared bands quite often lately. We typically run the gel at 140V with a 10-12% gel and do a wet transfer at 220 mA for 1.5 hr in cold room. We also noticed some dirty spots/dots (see...

10 August 2024 7,480 3 View

Fabrication of narrow glass capillary (inner diameter 200~500 nm)?

I need a very narrow glass capillary for my research. How can I make a glass capillary with an inner diameter of around 200 to 500 nanometers?

08 August 2024 8,915 0 View

How to back transform the results generated from analyses using log transformed with In(X+1) data?

I am conducting my analysis using SPSS. I log transformed my data using In(X+1) as my data contain zero values. However, when I want to back transform the regression coefficients generated from my...

31 July 2024 7,860 3 View

Is artifacts in XPS possible to build high deviation in binding energy larger than 5 eV??

Hello. Thanks for your consideration to see my question. Recently, I conducted XPS anaylsis of g-CN that is prepared from thermal polycondensation of DCDA, so-called conventional bulk-g-CN,...

30 July 2024 9,824 2 View

Could you try using PeptiCloud and see if it's a useful tool for biology research?

PeptiCloud (www.pepticloud.com) is a bioinformatic platform that allows researchers to organize and share their data for their projects as well as collaborate with others in one place. Through...

28 July 2024 4,762 2 View

Are these cassettes suitable for expressing PETase mutant in E. coli?

I created two potential gene expression cassettes (constitutive and inducible) for expression of a mutant PETase gene on PeptiCloud using the version tree feature, which allows users to create...

28 July 2024 7,559 1 View

How can i solve the code problem in Sentaurus TCAD?

Currently, I have created a gate-all-around process using sentaurus tcad and I am trying to measure the noise using the cmos noise code. However, an error occurred during the simulation. The error...

24 July 2024 6,352 0 View

What is the principle/mechanism behind aging of carbon (graphite) containing refractory mix for isostatically pressed refractories?

The resin bonded carbon containing refractories are aged before use. How time of aging is determined? And mechanism behind aging.

23 July 2024 3,205 0 View

When I am trying to distill triethyl amine while drying it over calcium hydride. How do I design the setup to let hydrogen escape without losing NEt3?

I am new to research. The boiling point of triethyl amine (NEt3) is 89 degrees centigrade. I am skeptical that when I will let the hydrogen escape which is getting generated in situ, I will also...

21 July 2024 7,284 4 View

How to load and plot 2D-PIV (particle image velocimetry) recorded velocity vector field in Techplot?

Dear Researchers I need to know, how to load and plot 2D-PIV (particle image velocimetry) recorded velocity vector field data in Tecplot? Thank You

02 August 2024 3,615 1 View

If modulus of elasticity is divided by any inertial or dynamic pressure (1/2rhov^2), is there any dimensionless number present to represent it?

While deriving for a momentum equation with elastic stress effects, I am planning to put a ratio between elastic modulus (in Pa) and dynamic pressure (in Pa) in a simplified form. I am not...

23 June 2024 8,059 1 View

Material is visually liquid, but rheometer shows G'>G". Why may this be?

I made a material which loos like liquid, but when I do the rheology test, the G'>G" . In my opinion, I think it means it was a solid or a gel. The test parameters are like this and the result...

19 April 2024 6,589 2 View

I need help about rheology, please ?

i need to know the answer of this question please with some references can help me

21 March 2024 4,364 0 View

How can we measure surface velocity?

Hi everyone, I plan to work on a stramtable (a physical model) to model a river. As I used to work on open-channel flumes, I was curious about the flow measurement. The depth and average velocity...

14 February 2024 336 2 View

Can I determine quantitavely the material's mechanical characteristic by G' and G"?

I determine the temporal behavior, frequency, and strain dependency of the hydrogel by rheology. I just wonder if I can determine the mechanical properties of my gel by using G' and G" taken from...

07 February 2024 4,787 2 View

How are rheological parameters, SYS, DYS, and PV, determined for 3D printable mortars using rheometer are correlated to actual printing process?

For example, Data obtained from a rheometer is as follows 1. Static yield stress - 1400 Pa, 2. Dynamic yield stress- 640 Pa, 3. Plastic viscosity-68 Pa-Sec, How are these values exactly...

24 January 2024 6,120 0 View

Suggest any good article on Gel Propellants used in aerospace applications. Also are gel propellants currently in use?

gel propellant, rheology, aerospace

23 January 2024 9,151 1 View

Would anyone please suggest me institutes in India where I can do magneto rheology studies ?

I want to study the viscosity of the of ferrofluids. Would anyone please suggest me institutes in India where I can do magneto rheology studies ?

10 January 2024 2,976 1 View

How to Calculate Phase Angle in Rheology?

I have data of G', G'', and Angular Frequency and I want to know how can I Calculate Phase Angle based on them?

05 January 2024 5,157 1 View

Yaying Hong

Http://www.smartmaterials.hk/

Alexander J. Babchin

Please, let me know when you find the source. Thanks.

Nicholas Charles Lee

I think this might be the only European source:

http://www.smarttec.co.uk/intro.htm

Thanks, Nicholas !

Dr Satish K Tuteja are you aware of a specific "Giant Electrorheological" (GER) product which they sell, or was this a more general recommendation for the sort of company who has the capability to make some as a special order?