Dear Researchers,
The article is attached therein.
Wu ZhenFen; Su YouYong; Wang Hua; Chen Fei. Corrosion characteristics and kinetics of copper in biodiesel.China Oils and Fats 2014 Vol.39 No.2 pp.67-70 ref.6
Best Regards,
Olusegun D. SAMUEL, Ph.D
Can basic inferior fuel related properties of crude biomass pyrolysis oil (BPO) be attributed to the presence of polar compound such as various oxygenates, nitrogen heterocycles and...
08 September 2019 4,766 4 View
What is the significance of additive in Oil Sands Recovery Processes? What is the role of Mechanical Engineer with the adoption of additive for recovery?
07 August 2019 6,559 3 View
How feasible is it to demonstrate solid fuel conversion and biodiesel production modelling in program environments such as matlab, python and fortran?
05 June 2019 4,547 4 View
What are the latest innovations in biodiesel production, hydrogen and fuel cells?
03 April 2019 4,905 3 View
What are the useful material and book for modeling biomass conversion processes using relevant tools (e.g., Aspen Plus)?
02 March 2019 7,865 3 View
As a Ph.D Supervisor, how will guide your project students to investigate CO2 capture and utilization in manufacturing industry via techno-economic tool?
01 February 2019 8,179 1 View
How can I adopt CFD, C+ + and finite element to improve and model Li battery management for effective utilization? I would appreciate discussions on the technique of model tools, experimental...
01 February 2019 5,816 2 View
Dear RG, How will I develop and validate gas turbine combustors with Computational Fluid Dynamics (CFD) models? Best Regards, Dr. O.D. SAMUEL
11 December 2018 1,853 4 View
Dear RG, Literature has showed that cetane number (CN) of biodiesel e.g jatroha oil methyl can be calculated by CN =Xme (wt.%)XCNme; where CN is the cetane number of the biodiesel; Xme is the...
11 December 2018 8,575 5 View
What is the best way to teach CFD/suitable lecture material to undergraduate students in Department of Mechanical Engineering?
11 December 2018 3,028 14 View
I recently came across an anatomy text by Carl Moller that was published in 1915 but it is in German or Dutch neither of which I can understand. I would like to know if there is an English...
10 August 2024 4,347 1 View
I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.
07 August 2024 4,526 4 View
Hello everyone, I need to dissolve stigmasterol for an animal experiment, but it hasn't dissolved in either DMSO or vegetable oil. Can anyone recommend the best solvent for stigmasterol?
01 August 2024 7,504 2 View
Hi all, may I ask you for advice about treating monolayer culture cell line with essential oil. Due to the hydrophobic character of the oil, I am concerning how can it equally affect to all the...
31 July 2024 5,301 2 View
a 15-page paper
29 July 2024 1,956 5 View
I've attempted to use this method to synthesize copper nanoparticles. Copper nanoparticles can be synthesised using a variety of precursor materials. CuSO4, distilled water, NaOH, and EDTA are...
28 July 2024 8,027 3 View
In general, when performing a Tafel analysis for corrosion resistance measurements, a line voltage scan is performed from say -250 to +250 mV vs. OCV at low scan speed around 0.125 mV/s. However,...
25 July 2024 7,982 3 View
I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...
22 July 2024 3,490 2 View
A diachronic study
21 July 2024 989 1 View
I am interested in the language processes of a person with a cognitive deficit from birth. The way the person understands the English language in a concise communication manner Discourse...
11 July 2024 6,730 4 View