Can I use precipitated PZT suspension?

Choi hj @Choi_Hj

01 January 2016 0 715 Report

Like picture, PZT sol-gel solution became suspension by precipitation

But because this solution is not cheap commercial solution, I want use this solution continously

Does anyone have idea for reusing this solution?

Badges
Science topic

More Choi hj's questions See All

How to etching sol-gel metal-oxide selectively?

I want to etching or patterning for bilayer channel layer of transistor consist of SnO2/ZnO on ZrO2 dielectric layer Generally, I thought that above process would proceed by HCl etchant But I...

04 May 2017 1,623 4 View

What's the difference between TSFA and TSFI?

To make p-doped graphene, many paper indicate using TFSA (bis-(trifluoromethanesulfonyl)amide, (CF3SO2)2NH)In Sigma-Aldrich, TSFA doesn't exist...

02 March 2016 8,194 0 View

Isn't there any method that maintains constant temperature in metal alloy by joule(ohmic) heating?

When I induced current, temperature of alloy increase continuallyIsn't there any method that maintains constant temperature in metal alloy when joule(ohmic) heating?

06 July 2015 561 2 View

How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

Which type of compound does lamda max of 218 indicate in a uv-vis spectrum of a partially purified compound through column and TLC?

A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...

11 August 2024 9,801 2 View

How to calculate CCS for Sodiated adduct ions and Multiply Charged Ions?

I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...

08 August 2024 8,329 0 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

How can I measure the thickness of thin film by Uv-Vis?

06 August 2024 7,810 3 View

Why is my ASO degraded quickly on agarose gel?

I have been working on Red blood cell-derived extracellular vesicles as Antisense Oligonucleotide (ASO) carriers. We normally run agarose gel to quantify the loading efficiency. I used naked ASO...

06 August 2024 3,130 2 View

Why is TLC not a form of partition chromatography?

Why is TLC not a form of partition chromatography and paper chromatography not a form of absorption chromatography?

03 August 2024 7,035 3 View

I'm optimizing a tetra-ARMS PCR protocol with amplicon sizes: 165bp, 123bp and 93bp. Why, in the gel, only 165bp is visible while I'm expecting all 3?

It's an end-point PCR protocol. I'm using 1.5% agarose gel with SyBR Safe dye and TBE as a running buffer, visualization on BioRad XR+ system. I was primarily thinking of primer efficiency,...

01 August 2024 4,673 4 View

CHO-K1 suspension adaptation protocol?

I am trying to adapt adherent CHO-K1 cells in F12K+10%FBS to suspension culture in only F12K, but in vain. I have followed Mirus bio as well as Thermo protocols, please suggest any alternative....

31 July 2024 3,756 0 View

Best mask design for metal deposition aiming build a Perovskite solar cell device?

What types of mask designs for metal deposition, to be used in a PVD system, are best suited for perovskite-based solar cells?

31 July 2024 4,835 3 View