23 December 2016 1 522 Report

I would like to synthesize some Co and Fe half sandwich complexes with replacing the classical Cp and Cp* ligands with other ligands sources

More Srikanth Vijjamarri's questions See All
How to calculate the c lattice parameter of MXene?

I need to find the c lattice parameter of HF etched Ti3C2 MXene and delaminated Ti3C2 MXene. Papers are reporting an increase in c lattice parameter after delamination. Any formulas, calculations...

17 May 2024 8,458 0 View

How to solve this error?

I have designed an Extended source vertical double gate TFET in Sentaurus TCAD. I have implemented the non-local mesh into it but it shows that it doesn't have non-local lines. Can anyone tell me...

12 April 2024 7,816 0 View

Why is Galvanostatic Charge and discharge curve is not perfectly triangular?

I am facing a reproducibility issue. I am measuring the specific capacitance for my sample (carbide based). I am getting pseudocapacitive behavior in CV curves. The first time while measuring GCD...

13 March 2024 5,666 2 View

Can I evaporate some water content from a slight colloidal solution using a rotary evaporator?

Iam having a slight colloidal solution with some dark suspensions. The solution is aqueous based (It has water). Can i evaporate some of this water content using a rotary evaporator? Can i extract...

12 January 2024 9,183 2 View

How to extract effective mobility in Symmetrical doubel gate MoS2 Field Effect Transistor?

Effective Mobility of charge carries in the channel

19 April 2023 6,809 0 View

Can contact stresses become independent of the rolling velocity in a viscoelastic rolling-contact?

In nonlinear viscoelastic rolling contact problems (assuming a viscoelastic wheel rolling/slipping with zero slip angle on a rigid body with friction), is it possible that the contact stresses...

11 April 2023 5,153 0 View

Did anyone tried bonding PET sheet to glass slide for microfluidic applications? If so, could you please help?

I want to bond 2 glass slides with a PET substrate in between them.

06 March 2023 9,164 2 View

What free / unlimited software is required for .XRDML file analysis?

I have not found any free unlimited versions of software for .XRDML file analysis. Please suggest.

24 February 2023 9,425 0 View

How to reduce impurities in synthesis of Manganese ferrite?

I have synthesized Manganese Ferrite nanoparticles by co-precipitation method. In the XRD analysis i have found two extra peaks around 31 and 45 degrees however the other peaks are matching with...

22 January 2023 7,453 4 View

Any suitable Ball mills for mixing elemental powders of 325 mesh?

I need some suggestions and suitable ball mill for mixing the elemental powders of 325 mesh size like titanium, tungsten,carbon,aluminium powders etc.. I need the model, name and brand of the ball...

22 January 2023 6,391 4 View

Similar questions and discussions
What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

Why don't d-orbitals split themselves, why does it take a ligand? why don't protons from ligand repel nucleus split d-orbitals?

why don't d-orbitals split themselves because of themselves without the presence of ligands? Electrons are indistinguishable. Why wouldn't it be more correct that protons from a ligand split the...

03 August 2024 3,589 3 View

Why doesn't chromium 2+ ion use all its d-orbitals to receive lone pairs from six waters in [Cr(H20)6)]3+?

I'm guessing it's because the ligand experiences too much electron repulsion or proton repulsion from the chromium to insert them close to the 3d-orbitals which are close to the metal nucleus. Is...

03 August 2024 1,370 1 View

How to select target material for X-Ray generation?

Generally, the target material is Mo, Co, Cu, Fe, Cr, etc, so on what basis should we choose this material?

31 July 2024 5,824 0 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,978 2 View

How can you draw a coordinate bond between a metal and donor atom in metal complexes, using discovery studio visulizer software?

Hello,, The metal complex ligand appears incomplete in the screen of the discovery studio visualizer

30 July 2024 3,354 1 View

Question about combustion Kinetics ?

I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...

30 July 2024 6,137 0 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close