Did anyone tried bonding PET sheet to glass slide for microfluidic applications? If so, could you please help?

More Srikanth Sangam's questions See All

How to calculate the c lattice parameter of MXene?

I need to find the c lattice parameter of HF etched Ti3C2 MXene and delaminated Ti3C2 MXene. Papers are reporting an increase in c lattice parameter after delamination. Any formulas, calculations...

17 May 2024 8,458 0 View

Does the format of the data makes any difference while analysing data through CamtrapR software?

I used timelapse software for entering the data from camera trap project. I entered the sequence of the images as 1/2 , 2/2, 1/4, 1/5. But I changed the sequence data in a text format while...

13 May 2024 4,123 0 View

Is there anyone who is using Timelapse software for the entry and analysis of camera trap data ? what are your feedbacks regarding the software?

I used Timelapse software to enter data of the camera trap project. I entered the sequence of the photos as 1/2,2/2,1/3,2/3,3/3 etc. while entering the photos clicked after a camera triggered. But...

13 May 2024 2,200 0 View

How to solve this error?

I have designed an Extended source vertical double gate TFET in Sentaurus TCAD. I have implemented the non-local mesh into it but it shows that it doesn't have non-local lines. Can anyone tell me...

12 April 2024 7,816 0 View

Why is Galvanostatic Charge and discharge curve is not perfectly triangular?

I am facing a reproducibility issue. I am measuring the specific capacitance for my sample (carbide based). I am getting pseudocapacitive behavior in CV curves. The first time while measuring GCD...

13 March 2024 5,666 2 View

Can I evaporate some water content from a slight colloidal solution using a rotary evaporator?

Iam having a slight colloidal solution with some dark suspensions. The solution is aqueous based (It has water). Can i evaporate some of this water content using a rotary evaporator? Can i extract...

12 January 2024 9,183 2 View

How to extract effective mobility in Symmetrical doubel gate MoS2 Field Effect Transistor?

Effective Mobility of charge carries in the channel

19 April 2023 6,809 0 View

Can contact stresses become independent of the rolling velocity in a viscoelastic rolling-contact?

In nonlinear viscoelastic rolling contact problems (assuming a viscoelastic wheel rolling/slipping with zero slip angle on a rigid body with friction), is it possible that the contact stresses...

11 April 2023 5,153 0 View

What free / unlimited software is required for .XRDML file analysis?

I have not found any free unlimited versions of software for .XRDML file analysis. Please suggest.

24 February 2023 9,425 0 View

How to reduce impurities in synthesis of Manganese ferrite?

I have synthesized Manganese Ferrite nanoparticles by co-precipitation method. In the XRD analysis i have found two extra peaks around 31 and 45 degrees however the other peaks are matching with...

22 January 2023 7,453 4 View

Fabrication of narrow glass capillary (inner diameter 200~500 nm)?

I need a very narrow glass capillary for my research. How can I make a glass capillary with an inner diameter of around 200 to 500 nanometers?

08 August 2024 8,915 0 View

Should I include H atom into C3N5 when i am doing DFT modelling?

Hi all, my experimental XPS results shown that my C3N5 sample consists of N-H bond, hence in this case I should incorporate the N-H bond into my DFT modelling. However, I do notice several papers...

07 August 2024 8,414 2 View

Polymer wear calculation?

What is the method for analytically calculating the wear and service life of polymer-polymer sliding pairs?

04 August 2024 1,078 1 View

How to explain the different interaction between soluble and insoluble polymer in water?

Hello everyone, I am try to understand the differences interaction between insoluble and soluble polymers in water with metal ions and how theit charge density (of metal ions) affect the interaction.

29 July 2024 6,350 3 View

What is the best method to detect the chemical composition of pollen ?

I have multiple small samples of grass pollen with anthers. I want to find a method to identify concentrations of proteins, lipids, and other various elements for these samples. any suggestions?

28 July 2024 5,331 1 View

What is the principle/mechanism behind aging of carbon (graphite) containing refractory mix for isostatically pressed refractories?

The resin bonded carbon containing refractories are aged before use. How time of aging is determined? And mechanism behind aging.

23 July 2024 3,205 0 View

Hi dear researchers, do you suggest the best and shortest path for chemical synthesis and green synthesis of magnetite(Fe3O4)?

Suggest the best and shortest route for the chemical synthesis and and green synthesis of magnetite(Fe3O4) The chemical synthesis should contain the least dangerous chemicals along with full...

21 July 2024 2,476 2 View

What is the difference between coordination polymer, MOFs, MCOFs?

Wherever I have referred, it puts me in a dilemma about the exact differences between these. It would be really helpful if someone can put me out of this trouble.

21 July 2024 3,045 3 View

Why do fish have fishy odors naturally ?

Chemical Engineering /Food Engineering

20 July 2024 4,152 4 View

Appearance of crystallization peak in heating cycle of DSC test?

For which types of polymers, the crystallization peak in heating cycle of DSC test can be observed and for which types cant? In another word, when this exothermic crystallization can be observed...

18 July 2024 348 3 View