Can gypsum and silica gel be used to stick amberlite layer on to si wafer so that it stays waterproof?

Barlina Konwar @Barlina-Konwar

17 January 2017 0 3K Report

i want to design a sensor for removal of naringin using amberlite ion exchange resin on a si wafer

Badges
Science topic

Similar topics
Mathematical Sciences
Graphs

More Barlina Konwar's questions See All

Is it possible to merge skeleton based feature, RGB feature, Depth feature as well as Doppler radar based feature for classification process ?

Anyone have any idea ?

12 October 2020 3,346 3 View

What should be an optimum concentration of gold nanoparticles for conjugation with antibodies for a lateral flow assay ? In OD or in nM ?

There are numerous examples where researchers have optimized the amount of antibodies needed for conjugation with nanoparticles . But there is very less data as to what is the concentration of...

22 August 2019 4,072 3 View

What is the significance of irreversible temperature in M-T curve?

The system is superparamagnetic and with increasing applied magnetic field, the value of irreversible temperature gets decrease

23 December 2018 4,511 2 View

Is the particle size of amberlite ir 120 less than the particle size of amberlite ira 400?

i am looking for different bead size ion exchange resin

23 April 2017 4,011 2 View

How can we decrease the diameter of ion exchange resin without losing its properties?

is it possible to pulverize ion exchange resin?

18 April 2017 3,793 3 View

How can the adhesion of silver to the glass slide be improved ?

I am trying to prepare a silver thin film over glass. First I attempted to deposit silver. But I observed the poor adhesion of silver. I have to prepare a sensor chip for surface plasmon resonance...

19 December 2016 3,447 7 View

Hello everyone. I was in need of sector wise district level GDP data for India (for the state of Assam specificaly). Can anybody help?

A detailed sector wise (primary, secondary and tertiary sectors separately) data will be of much help.

24 June 2015 5,877 4 View

Is it wise to run the ARCH(p) - GARCH(p,q) model, once the LM test for ARCH has failed to reject Null Hypothesis?

i.e. the time series does not have ARCH effect My experiment is leading to acceptance of Null Hypothesis,Making it difficult to proceed further.

26 March 2015 1,160 3 View

How can I use game theory in wetland management analysis?

I need to study the present management scenario of the wetlands of my area and also to make suggestions regarding their possible sustainable management. Need guidelines about what econometric tool...

05 March 2014 4,413 3 View

In uv-vis spectroscopy, what is the change in the absorbance value after coated silver nano film by 11-MUA

Thickness of the silver film is almost 100 nm.

01 January 1970 2,608 4 View

Which type of compound does lamda max of 218 indicate in a uv-vis spectrum of a partially purified compound through column and TLC?

A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...

11 August 2024 9,801 2 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

How to calculate CCS for Sodiated adduct ions and Multiply Charged Ions?

I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...

08 August 2024 8,329 0 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

How can I measure the thickness of thin film by Uv-Vis?

06 August 2024 7,810 3 View

Why is my ASO degraded quickly on agarose gel?

I have been working on Red blood cell-derived extracellular vesicles as Antisense Oligonucleotide (ASO) carriers. We normally run agarose gel to quantify the loading efficiency. I used naked ASO...

06 August 2024 3,130 2 View

In the presence of VERY high concentration (1000 ppm) of silicon, the adsorption isotherms of arsenic are showing anomalous trends, why so?

I conducted an adsorption experiment of arsenic on soil in the presence of different doses of silicon as competing ions to see the effect of silicon on arsenic adsorption and desorption. I took 5...

03 August 2024 6,500 3 View

Why is TLC not a form of partition chromatography?

Why is TLC not a form of partition chromatography and paper chromatography not a form of absorption chromatography?

03 August 2024 7,035 3 View