The Blue Bridge (officially named the Pioneer Memorial Bridge is a four-lane arch-truss bridge connecting Pasco, Washington to Kennewick, Washington. U.S. Route 395 crosses the Columbia River via this bridge.

https://en.m.wikipedia.org/wiki/Blue_Bridge_(Washington)

I-35W Mississippi River bridge

The I-35W Mississippi River bridge (officially known as Bridge 9340) was an eight-lane, steel truss arch bridge that carried Interstate 35W across the Saint Anthony Falls of the Mississippi River in Minneapolis, Minnesota, United States.

In 2007 the I-35W Mississippi River bridge in Minneapolis collapsed suddenly from slow cracking of a single undersized and over-stressed gusset plate.

https://en.m.wikipedia.org/wiki/I-5_Skagit_River_Bridge_collapse

Thanks for sharing this. I also request please share similar kinds of examples which are generally optimised in the various papers.

Thanks ones agin for sharing this information 

The Dey Road Bridge is a historic truss bridge that spans the Tiffin River near the city of Defiance, Ohio, United States. Built in the 1900s, it has been designated a historic site.

https://en.m.wikipedia.org/wiki/Dey_Road_Bridge

Truss applications remain old with some of the old bridges. With the advent of Prestressed Concrete construction, it has become obsolete. Trusses today show up in front of buildings adding aesthetics to it. Trusses are still used for supporting roof of factories.

Müngsten Bridge

https://en.wikipedia.org/wiki/M%C3%BCngsten_Bridge

Hamm Railway Bridge

https://en.wikipedia.org/wiki/Hamm_Railway_Bridge

South Bridge (Cologne)

https://en.wikipedia.org/wiki/South_Bridge_(Cologne)

Big Four Ohio Bridge

https://en.wikipedia.org/wiki/Big_Four_Bridge

Prolites is the distributor of Eurotruss aluminum trusses, stage systems, roof systems and lifts in Lebanon

following is a link to their work.

https://www.prolites.com/what-we-do/trusses-stage-equipment-supply/?gclid=CjwKEAjw5cG8BRDQj_CNh9nwxTUSJAAHdX3fF0ZHnuSXCT4IjgyIO3UxRcarkPGAwrgLGIXRQp41ChoC08rw_wcB

Thanks you very much. Please add few more examples.

Hello Ghanshyam,

Trusses are fascinating structures as they can be found/used in bridges, roofs, oil platforms, telecommunication towers, aircraft hangars, industrial buildings, car parks, etc. etc.

These are some examples from the United Kingdom:

http://www.bristol.ac.uk/civilengineering/bridges/Pages/HowtoreadabridgeTrusses.html

More applications at:

http://www.steelconstruction.info/Trusses

TOP TEN LONGEST CONTINUOUS TRUSS BRIDGES IN THE WORLD

Few of the Continuous truss bridges are very long and are popular as well.In this article you will get a list of world’s top ten popular and best bridges. This list is on the basis of span length, firstly they are ranked according to length and then each of them is discussed briefly.

http://www.toptenfindings.com/top-ten-longest-continuous-truss-bridges-in-the-world/

The Bridge of the Americas (originally known as the Thatcher Ferry Bridge) crosses the Pacific approach to the Panama Canal at Balboa, near Panama City.

Total length 1,654 m (5,425 ft)

Width 10.4 m (34 ft)

Longest span 344 m (1,128 ft)

https://en.m.wikipedia.org/wiki/Bridge_of_the_Americas

The Ikitsuki Bridge is a continuous truss bridge that connects Ikitsuki to Hirado. Completed in 1991, it has a main span of 400 meters (1,300 feet).[1] It is the longest continuous truss bridge in the world.

https://structurae.net/structures/ikitsuki-bridge

https://structurae.net/structures/ikitsuki-bridge/photos

a roof truss for Elatanya hotel in Assuit Egypt

The examples are Bridges, roof trusses etc.

They can be used as the column of large shelters in industerial structures.

Sky Gate Bridge R at Kansai International Airport, Osaka, Japan, is the longest double-decked truss bridge in the world. It carries three lanes of automobile traffic on top and two of rail below over nine truss spans.

Sydney Harbour Bridge is one of Australia’s most well known and photographed landmarks. It is the world’s largest (but not the longest) steel arch bridge with the top of the bridge standing 134 meters (440 feet) above Sydney Harbour. It took eight years to build and opened in March 1932. Because the steel expands or contracts depending on whether it is hot or cold the bridge is not completely stationary and can rise or fall up to 18 cm (7.1 inch)

http://www.touropia.com/most-famous-bridges-in-the-world/

https://en.m.wikipedia.org/wiki/Sydney_Harbour_Bridge

If possible please add real pictures

400-Foot Railroad Bridge Rolled into Place across Torrence Avenue Believed to Be Largest Fully Assembled Truss Bridge Ever Moved

http://www.railwaygazette.com/news/infrastructure/single-view/view/1950-tonne-truss-bridge-span-moved-into-place.html

https://www.highbeam.com/doc/1G1-300891562.html

Dear Behrouz Ahmadi-Nedushan,

Thanks a lot for your valuable support.

I got too much information from this. Thanks all of you.

Ghanshyam G. Tejani ....

Good question… Please check references below.. hope it will be helpful for you…

Regards…

http://rimoli.gatech.edu/documents/A%20Brief%20Introduction%20to%20Trusses.pdf

http://me.utep.edu/cmstewart/documents/ME1321/Project%20Final%20Report%20Example.pdf

Dear Ghanshyam G. Tejani ... Please check my articles on Steel structures application of trusses... all cases are in real life

Thanks for sharing your article

Ghanshyam G. Tejani (I find the application of lattice support towers in wind turbine applications to be extremely interesting)