Can anyone help me with what I mention below?

11 November 2018 0 3K Report

Dear all,

Can anyone direct me to companies that sell industrial biological activated carbon adsorbers for the treatment of a liquid effluent?

Many thanks,

Simon Sakhel

Badges
Science topic

Similar topics
Chemistry
Carbon

More Simon Sakhel's questions See All

Can someone provide me with the chemical name or CAS of the compound below?

I am trying to find the CAS or chemical name of the cationic polymer LPM 3135. Can anyone help me with that? Does anyone know about a company that sells this cationic polymer? Many thanks.

01 February 2020 6,779 1 View

Can anybody help me with what I mention below?

The author of the following Article "Sizing external heat exchangers for batch reactors" Chemical Engineering December 1,1980, Richard J Malone, mentions that his equations for sizing external...

09 October 2019 6,610 1 View

Can anybody help me with what I mention below?

What is the largest possible overall heat transfer coefficient for a shell and tube heat exchanger if the fluids in the shell and tube side are both water and this heat exchanger has one shell...

09 October 2019 7,986 2 View

Can anybody direct me to an equation for the adjustment of mid-season stage crop coefficient and end of late season stage crop coefficient?

Dear all, I am looking for equations for the adjustment of mid-season stage crop coefficient (Kcmid) and end of late season stage crop coefficient (Kcend) similar to the following...

31 December 2018 7,276 0 View

Can the solute equilibrium concentration resulting from activated carbon adsoprtion be calculated on a theoretical basis only using certain equations?

Can the equilibrium concentration of a solute in water resulting from activated carbon adsorption be determined on a theoretical basis only using certain equations or correlations? If there is...

01 February 2018 8,043 5 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

What is the solvent for 8YSZ nano material?

I need to do some experiment with it in liquid form.

07 August 2024 613 3 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

Hi, please what is the best tool on Aspen plus that can help me get the best inlet temperature and pressure for cryogenic distillation?

I am trying to recover liquid CO2 from a mixture of 0.6 CO2, 0.3 N2, and 0.1 O2. My aim is to recover about 99% liquid CO2 at the bottom of the column and make sure the amount of gaseous CO2...

06 August 2024 4,611 0 View

How much Yeast should we add to fermentation media?

I have prepared a liquid broth containing Yeast (S. Cerevisiae) that i need to add from it to fermentation media of lignocellulosic hydrolysate. I need to know based on what parameters do we add...

06 August 2024 662 1 View

What is the best protocol for freezing the rat brain in preparation for protein detection by Elisa ?

What is the best way to freeze the rat brain - liquid nitrogen, Dry ice , isopentane - after isolation for later protein investigation by Elisa?

01 August 2024 1,722 1 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,978 2 View

Question about combustion Kinetics ?

I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...

30 July 2024 6,137 0 View