Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to calculate the annealing temperature of a primer pair?

I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...

01 March 2021 360 7 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

The reason that the culture of white fungi Contamination with green mold(Trichoderma), the culture autoclave at121 for 15 min. What is it?

Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.

27 February 2021 9,356 3 View

How to include original NMR data in a manuscript?

hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...

27 February 2021 734 4 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

Who are the possible experts I can reach out to regarding the reseach topic: Activated Carbon as Water Filter?

Hi! Me and my team mates are currently new in doing a research study. We do not have any previous experiences in research. And we just wanted to know what type of experts (the field they in) can...

19 February 2021 9,596 4 View

Can any one provide information about medicine, epidemic and critical issues or it is mandatory to be an expert ?

Due to the pandemic of coronavirus, the most source that the people depend on was social media. There is no guaranteed solution that is biased from political opinion. An example of that the...

01 February 2021 7,567 3 View

What is your expert opinion/experience/suggestion about the Methodology of Grey water Analysis?

Please share your perception

31 December 2020 8,474 3 View

In your opinion, if it is really a viruses then, what measure can we adopt for positive aspect of this pandemic?

Experts opinion please

31 December 2020 3,057 4 View

How I can choose best response surface methodology design for optimisation of of PH, temperature, metal ion concentration, adsorbent dose?

I wanted to use CCD aur box-behnken design Which one is better and how I can do experiment using design expert software

13 December 2020 6,323 5 View

DoE: Possible reasons for having a lot of significant effects? Is it as complex or went something wrong?

I did a product development using Design Expert for planning and evaluation. There is a response with a lot of significant effects shown in the Half Normal Plot. By testing factors A, B, C, D I...

06 December 2020 5,128 3 View

How can I design my experiments with different number of variants of one factor?

Dear all; I have 4 factors to design my experiments. 3 of the factors are numerical but one is nominal. for nominal factor I have 3 type as: A, B, C. the levels of A, B & C do not match each...

02 December 2020 5,535 11 View

Chi Square/CMIN value in larger sample size by using AMOS?

Hi, I am working on cross-cultural research. For that, I need to perform MG analysis in AMOS. I found the following results: CMIN / DF : 5.619 GFI : .946 AGFI: .934 CFI: .969...

23 November 2020 9,998 3 View

Which is the best scale available to measure conflict management styles?

I have come across multiple instruments for conflict. Now I'm confused as to which one to use. Expert opinions are welcome.

22 November 2020 3,651 5 View

Which anomaly detection technique for synthetic data?

14 November 2020 4,722 3 View