1. Gas chromatography

2. Infrared spectroscopy (IR)

According to UNEP.com, reducing methane emissions is crucial to addressing climate change and improving air quality. After carbon dioxide (CO₂), methane is the second gas that contributes the most to global warming. Here are some strategies and approaches to confirm and manage methane gas production:

1. Monitoring and Measurement: Implements monitoring systems to measure methane emissions at gas production facilities. Uses specific sensors and technologies to detect and quantify methane emissions. Carry out regular measurements to evaluate the amount of methane released during production.

2. Data and Transparency: Participate in initiatives such as the Global Methane Commitment to provide accurate data on methane emissions. Provide transparent information on methane emissions in your operations. Collaborate with organizations and government agencies to share data and improve global understanding of methane emissions.

3. Capture and Use Technologies: Considers the capture and use of methane released during production. Biogas, produced from agricultural waste and other organic materials, is a renewable source of energy that can be used. Evaluates the economic and technical feasibility of implementing methane capture and use technologies.

4. Policies and Regulations: Complies with local and national regulations related to methane emissions. Participate in compliance programs and audits to ensure your operations are within established limits. Contributes to global efforts to reduce methane emissions, such as the European Union Methane Strategy.

5. Education and Training: Train your staff on the importance of proper methane management. Promotes a culture of environmental responsibility and awareness of greenhouse gas emissions.

Remember that confirmation of methane gas production testing must be based on accurate data and sustainable approaches to minimize its environmental impact.

​

For just confirmation, without quantification the simplest is to install a gas sensor, for quantification the simplest is to add a gasometer and a carbin dioxide absorbent

To confirm and test if a gas is methane, you can perform a simple flame test. Carefully release a small amount of the gas in a controlled environment and ignite it. If the flame is blue and relatively clean, it indicates the presence of methane. However, it's crucial to exercise extreme caution during this test.