Actually what is the effect of SnR on AMR systems
@Vania thanks for the article and observation
I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...
03 March 2021 4,116 4 View
Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...
01 March 2021 9,537 2 View
I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...
01 March 2021 6,985 3 View
I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...
01 March 2021 360 7 View
Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?
01 March 2021 9,785 3 View
I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...
01 March 2021 8,415 1 View
Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.
27 February 2021 9,356 3 View
hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...
27 February 2021 734 4 View
I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...
27 February 2021 8,483 3 View
I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...
26 February 2021 8,183 3 View
I want to map these river geoforms with as little subjectivity as possible. I have a high resolution DEM generated by drone data.
22 February 2021 7,800 3 View
Hi, I'm trying to rearrange an abbreviation list for a manuscript such that it would be listed in alphabetical order. Is there a function that does this automatically or is manual my only option?...
18 February 2021 4,870 2 View
Hello, I am currently using the Malvern Zetasizer software for the purpose of obtaining the size distribution of nanoparticles produced in the lab. When I perform the runs in the software to get...
15 February 2021 4,251 1 View
I am working in the area of Handwriting recognition for Bangla. As there are many DL architecture, I am confused which one to select.
15 February 2021 4,996 1 View
Hi all. I have a set of coordinates of bounding boxes for AVA Dataset. This dataset is used in action recognition. My goal is to get the areas around the people (people are inside boxes) and do...
13 February 2021 2,538 2 View
I am working on one optimization problem. the model with two states, the transition between the two states based on one threshold value (L = 5, which L< 5 -> Normal state, L== 5 ->...
11 February 2021 4,045 3 View
The goal of regression model is either to minimize the prediction error or to maximize a classification accuracy depending on the type of the model. Is there any optimization algorithm that is...
10 February 2021 4,128 3 View
When doing measurements in DLS (either size or zeta potential), I have the option to input an automatic number of measurements or to set it manually. My question is: is there a drawback in...
08 February 2021 9,423 6 View
I am working on gait analysis using a feed-forward NN. When I use data from the accelerometer (3 columns for each axis if stored in a data frame), I get an accuracy of 95%, and when I used data...
07 February 2021 9,654 6 View
In Abaqus I know that there are two methods for incrementation (Automatic and fixed incrementation). I want to control the incrementation by myself. I want to input the values of load increment...
03 February 2021 6,943 3 View
