I am working with bacterial lipase crude enzyme. Whether it should be stored in -20C Or -80C before and after lyophilization to retain its activity?
Thanks in advance
If you have a -80oC freezer available, I would recommend storing the enzyme at that temperature.
It all depends on the nature of the lipase. But generally freezing at -80°C should not cause (too much) denaturation
I am planning to collect human fecal samples for metatranscriptomic analysis using MGI. These samples are from indigenous people living in a region with high temperatures. I will have access to a...
06 August 2024 1,365 3 View
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...
01 August 2024 7,051 5 View
Greetings. I’m currently running a nested pcr for giardia. My mastermix comprised of 3mM Mgcl2, 5unit of taq polymerase, 0.2uM of forward and reverse primers each respectively and 0.2mM of dNtp...
22 July 2024 9,761 5 View
For which types of polymers, the crystallization peak in heating cycle of DSC test can be observed and for which types cant? In another word, when this exothermic crystallization can be observed...
18 July 2024 348 3 View
I've been using Hobo pendants for years but they are up from less than $50 a few years ago to over $100, and I'm in need of an alternative.
08 July 2024 7,164 1 View
We aim to study an exothermic process and evaluate its temporal changes. Could you recommend suitable software for this purpose and explain how to conduct this analysis? What specific data is...
30 June 2024 8,413 1 View
We have been lyophilizing several nanoparticles like iron oxide, cerium oxide to get powder sample. However, for gold nanoparticles and any other NPs with gold, they turn sticky after lyophilizing...
26 June 2024 9,171 3 View
Will silver coating be able to hold such a high temperature? And will there be any effect of coating thickness?
23 June 2024 8,550 0 View
From my knowledge- mushrooms are highly sensitive to temperature. How can growers manage suitable temperatures?
22 June 2024 7,346 0 View