what is a suitable dispersing additive for the production of liquid color masterbatch for thermoplastics (sets) applications with the intention of replacing the color pigment with graphene oxide (slightly acidic in nature)?
Hello. I have a skewed elliptical coordinate system (I use alternative elliptical coordinates). And I need to determine connections between coordinates in order to fetch a covariance matrix of...
28 February 2021 364 3 View
Hello fellow researchers, I recently have a problem with an HPLC coupled to an Orbitrap mass analyzer. I usually use some protein mix to make sure the equipment is ready to separate and read...
09 February 2021 3,595 8 View
In my research related to monitoring the cow behavior with help of sensors I have a permanent and principal problem with the data for model validation. I tried to find some available open-source...
26 December 2020 8,197 2 View
Hello, For a project which studies how teens deal with social media and their interfaces, I'm interested in so-called "activity theory" (also know as cultural-historical activity theory). I know...
21 October 2020 2,364 4 View
Hi everyone! Does anybody know about a good website or place to get some guidance on Northern blotting? Also, advice on blotting the RNA ladder?
07 October 2020 739 3 View
I am trying to design a vector as compact as posible to test DNA transcriptional enhancer and/or repressor activity, I already have a compact bacbone (pICOz vector), minimal promoter, translation...
22 August 2020 1,083 1 View
Hi everybody! I need to amplify phage DNA so as to be able to produce restriction profiles using different restriction endonucleases. Can anyone recommend which primers should I use? I know random...
06 August 2020 1,194 3 View
My current research is about SPC and I'm interested in tuning strategies for these types of predictive control approaches. The cost function is on the photo and the tuning parameters are Np...
23 July 2020 1,176 1 View
On the role of aluminum in TWIP steels
22 July 2020 5,670 4 View
There are some theories, as Pelgrum and Law (2003) suggested that it is necessary to make a switch between the teacher and the student roles. I mean, the student should be also the active role in...
15 July 2020 5,169 15 View
Hello! I want to quantify by ELISA the secreted (from platelets poor plasma) and the non-secreted (from platelet lysate) PF4 before and after TRAP stimulation. I will use the ELISA from R&D...
03 March 2021 1,499 2 View
The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...
03 March 2021 5,857 3 View
Hello, We would like to increase the yield of our PCR product. We are running a series of PCR reactions that is targeting ~1.1kb sequence. We begin each reaction with ~400pg of template DNA...
02 March 2021 4,029 3 View
Hello! I'll do a size exclusion chromatography, but I only have an open column, and I'll perform the peptide extraction from yeast, using buffer lysis (sodium phosphate 50 mM/NaCl 30 mM/DNAse and...
01 March 2021 2,215 2 View
In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...
01 March 2021 2,207 3 View
Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.
28 February 2021 3,640 3 View
28 February 2021 2,534 2 View
I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...
28 February 2021 5,415 1 View
During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...
25 February 2021 7,994 3 View
I'm building a cfx model of thermoplastic pultrusion process on ansys and i have a doubt on how is the proper way to set this parameter in a porous medium
24 February 2021 1,915 1 View