How can you supply the catalytic agent to the immobilized regulatory enzyme in vertical bioreactor works with continuous feeding ?

Described in the question

11 December 2018 1,512 3 View

What are the permitted limits for exposure to nanoparticles of all kinds? Is there an international standard for this?

I am surprised by the absence of an international standard for exposure limits for nanoparticles, although the actual work in this area has already started in the nineties of the last century and...

09 October 2018 8,265 0 View

Dear Colleagues,Do you think that measurement of BOD5 is correct around the world?

BOD5 is an important parameter for the quality of domestic wastewater treatment. Although one standard global scientific method is used to determine the concentration of the pollutant, I think...

08 September 2018 6,820 4 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

LOAD DISPLACEMENT CURVES Stiffness increasing in ANSYS non linear analysis. HOW CAN I CORRECT IT?

Hi. I am doing non linear FE analysis using a new material beam under flexural 2 point loading using ANSYS. I have defined a bilinear material model. The solution has converged. In results I am...

01 March 2021 9,911 3 View

How relevant is Mini slump cone?

for all the rheology researchers, my question is, how relevant is a mini slump cone (smaller than a standard 50 cent rheometer). currently based on testing, the thickness of slumped material is...

26 February 2021 3,668 1 View

Stress/strain tensors decomposition ???

25 February 2021 6,760 1 View

How to reduce residual stresses in MD simulation?

I am working on a preparation of representative polymeric structures of some popular polymers, such as polyimide or PTFE for MD simulation, during which a single nitrogen or oxygen atom will be...

24 February 2021 8,105 3 View

Suggestions for occupational stress surveys?

I am currently writing a masters thesis on reasons for occupational stress in the early childhood classroom, and want to include a short survey assessing participants work-related stress levels. I...

24 February 2021 8,678 2 View

The most suitable method to calculate the stress intensity factor in the presence of contact between the crack lips?

I'm trying to study cracked structures under a compressive load taking into account contact between the crack lips. I would like to know if the method of extrapolation by displacement remains...

21 February 2021 8,694 4 View

What influences inter-day reproducibility in UPLC-MS/MS analysis?

I was analyzing some metabolites in human plasma. While the intraday precision of these metabolites was acceptable ( less than 20%), the interday precision was quite large. So what influences...

13 February 2021 9,183 9 View

(western blot) can methanol damage my antibody signal?

I accidentally rinsed with methanol after adding my primary antibody to my membrane. I noticed after ~10 seconds and immediately replaced it with PBST (3x15 min washes). Will my antibody signal be...

12 February 2021 5,824 3 View

Is secondary metabolite production more at vegetative growth stage or during reproductive stage?

Hi, I am working on the effect of heavy metals on a medicinal plant by pot experimentation. Analyzing the effect of heavy metals on secondary metabolites is one of the parameters. I will be...

11 February 2021 6,683 6 View