I want to apply four displacement boundary condition to the attached model in hypermesh (I am working in Optistruct). Please, help me out or explain how I can achieve it:
x_disp = x displacement
y_disp = y displacement
x_coord = x coordinate
y_coord = y coordinate
1. (x_coord = 100, y_coord = 35), (x_disp = 2.754, y_disp = -2.345)
2. (x_coord = 100, y_coord = 40), (x_disp = -3.754, y_disp = -1.345)
3. (x_coord = 15.3, y_coord = 100), (x_disp = 1.34, y_disp = 2.345)
4. (x_coord = 15.3, y_coord = 13.4), (x_disp = 2.34, y_disp = 1.345)
Thank you.
Dear Samuel Sir,
After creating your model you select the Boundary conditions and Loads tab from the Hypermesh tools, in that go to the constraints - In constraints select apply option to the nodes with require DOF (In this you can provide the required DOF for the edges, nodes or elements) [out of 6 DOF conditions you can select the required one for your problem]
- Badges
- Science topic