Anyone try to use 3D printing technique to produce hydrogel scaffold?

05 May 2014 1 2K Report

If any one work on bio-medical application might know

I am currently working on a 3D printing machine to deposit hydrogels with cell into 3D structures. There are many references on this topic. We can discuss on this.

Badges
Science topic

More Ben Xu's questions See All

Can anyone recommend a brand of cas9 protein that can be used for in-vivo editing in model animals?

zebrafish and mouse

19 July 2024 9,158 1 View

Dear scientific researchers, may I ask you, what is the function of the ∑ in the picture?

10 July 2024 2,037 3 View

Hot to do MTT assay data analysis?

I have repeated an MTT assay three times using different batches of the same cell line. Each time, I tested the same treatment (different medium) and seeded the same number of cells. Additionally,...

08 July 2024 1,900 1 View

Why are there holes on the surface of TiO2 films deposited by ion beam sputtering?

We have observed many holes on the surface of TiO2. These holes have a diameter of approximately 1 µm and a depth of about 30 nm. The formation of these holes is mainly related to the...

20 June 2024 3,861 1 View

How do you understand that geometric phases are complex?

What kind of cases are geometric phases real? In what case is the geometric phase complex? If the geometric phase is complex, how do we make sense of it?

18 June 2024 6,388 4 View

I need content writers, poets, researchers to my new online magazine, would you be interested?

Good day! I am the CEO of an online magazine called Order Of The Pen . We specialize in promoting new writers via our platform on Wix and Partnership with Mailchimp for email marketing,...

18 June 2024 4,117 0 View

3T3-F442A cells not adhering to coverslip?

Hi, I am attempting to culture 3T3-F442A cells and carry out IF staining. I'm testing a variety of different compounds on the cells (e.g. lopinavir, clozapine, olanzapine etc.) Up until recently,...

16 June 2024 2,754 0 View

Why the rat cortical primary neurons suddenly dead/turn into bad condition after about 6days?

I used SD rats (E19) for cortical neuron extraction. Due to the need for subsequent special experiments, I cultured the neurons in a Corning PDL 384-well plate. The culture medium is Neurobasal +...

12 June 2024 1,714 4 View

What does oxide content mean in XRF testing?

XRF tests were performed on magnetite where the oxide content showed 49.822% Fe2O3, so why not Fe3O4 content as a percentage? How can we deduce the Fe3O4 content?

25 May 2024 1,714 2 View

Can acoustic wave transfer through solid medium?

Since the acoustic impedances of air and solid medium are not in the same order, the acoustic wave transferring in the air would be theoretically fully reflected on the solid surface. So my...

21 May 2024 6,858 9 View

Geotechnical Engineering (Proceedings of the ICE) time review?

Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...

10 August 2024 6,493 1 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

What are the shear and normal stiffness values of an LLDPE liner in 3D numerical modeling of a stockpile?

I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...

05 August 2024 3,665 0 View

How to find a reaction is reversible or irreversible in CV? How to know the number of electrons transfer?

My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...

30 July 2024 4,671 3 View

How to check pH of a high strength hydrogel?

We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...

30 July 2024 942 2 View

What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?

29 July 2024 7,714 4 View

May I know the exact Quartile of the journal- Advanced Engineering Materials (Wiley) for material science category?

In some data sources it has been grouped in Q1 and some shows it is Q2.

29 July 2024 4,227 2 View

CAD File of human's & rat's respiratory airways ?

Dear all, I am working on particle deposition in human's & rat's respiratory airways using CFD and I am looking for the 3D CAD file for my simulations (STEP or IGES format). If somone has such...

29 July 2024 1,092 2 View

Ternary in Electrical Engineering?

Dear Research Community I would like to invite Elctrical Engineering specialists to solve problems related to Ternary Algebra or tripple sets I have an algorithm that places in relation three...

28 July 2024 5,771 2 View

Does anybody know why my chitosan/pva/gelatin hydrogel dissolve in PBS?

My final research is about making chitosan/pva hydrogel for wound healing using gelatin as crosslinker. Last month, i made the thin film hydrogel and it turn well. It was okay. Last week, i make...

28 July 2024 2,794 6 View