Any one have any contact of supplier or manufacture contact of Microreactor Assisted Nanoparticle deposition (MAND) system?

Sameer Sheshrao Gajghate @Sameer_Gajghate

11 November 2016 0 7K Report

Need contact details of MAND system supplier or manufacturer?

Badges
Science topic

More Sameer Sheshrao Gajghate's questions See All

How to calculate Miller indices from available XRD data?

I want to calculate the miller indices for Graphene nano material from available XRD data, any method or suggestion in this regard. Whether it is possible for Graphene or not? Thanks with...

01 February 2019 10,086 4 View

Why more importance is given to SCI indexed journals, Specially in INDIA?

SCI or E-SCI is it indexing of Web of Science/Thomson reuters or is it different. If the paper published in journal which is indexed by E-SCI will be considered as same credit like SCI. Which one...

03 April 2018 2,566 0 View

During microscopy is their any chances of change in material thermal/ physical/ chemical properties?

while studying the structural behavior using TEM, XRD, AFM, SEM etc. microscopy is their any chances of any change in material thermal/ physical/ chemical properties.

07 August 2017 9,013 11 View

Will the first barrier fuel cladding of zirconium alloy can be covered by any other material?

I want to know about the fuel rod which is cladding of zirconium alloy can be covered by other material. if so, will its reaction distrubs the reactor or not.

06 July 2017 603 9 View

How much is the importance of surface morphology impact in pool boiling heat transfer enhancement?

How much is the importance of the surface morphology on heat transfer enhancement in pool boiling with respect to industrial scenario?

09 October 2016 2,251 2 View

I need technical details, specifications, uses and working of a rectifier. Can anyone help?

I came to know about the rectifier as a high heat flux ELECTRONIC components/device, so need deep technical details, its specification, uses, dimensions & working so i study in details about...

31 December 2015 4,089 1 View

What are the parameters to be studied for an experimental study on microchannel testing ?

While going through the research paper Pressure, Heat transfer coefficient, Inlet and outlet temperature of fluid, velocity of fluid, Reynolds number, etc are the parameter to be needed for study....

11 December 2015 1,501 6 View

Does anyone know about insulated-gate bipolar transistor; in this semiconductor surface minichannels can be prepared?

IGBT semiconductor, how it is manufactured or material used for process. Is it feasible to prepared mini channels on this semiconductor. What issues must be study before mini channels prepared...

08 September 2015 2,843 4 View

Recent issues in heat transfer flow boiling in microchannels?

1. Heat transfer enhancement issues in electronic cooling systems by flow boiling?

06 July 2015 5,810 2 View

Can anyone suggest a good instrument for finding the physical properties of varying concentrated additives in water?

I want to find out the physical properties of some additives with varying concentration with and without mixing in the water; also the best instrument to measurement of surface tension values with...

06 July 2015 4,102 4 View

Could you recommend some articles on Urban Transportation System optimization and Innovation?

13 August 2024 2,595 3 View

Hello researchers Is this a random laser or just fluorescence?

I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.

09 August 2024 9,894 2 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

Could dyes amplify the spectrum of light to a specific wavelength?

I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...

05 August 2024 3,290 1 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,624 3 View

Can i quantify a nanoparticle encapsulated in cell culture medium by hplc?

Hello, if you made a transwell assay where you incubate the cells with a nanoparticle-encapsulated drug and considering that in the oposite compartment you'll have both the free and encapsulte...

03 August 2024 2,730 1 View

What is the problem with these tissue culture plants?

All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.

01 August 2024 589 4 View

A Question about Phd thesis?

Hello everyone What is your opinion about the introduction of an expert decision support system in which the rules are extracted from existing data without human intervention, instead of being...

31 July 2024 5,785 4 View

Mossbauer spectroscopy Co0.6Mn0.4Fe2O4 MNPs?

Following curve related to Co0.6Mn0.4Fe2O4 Magnetic nanoparticles with extra phase a-Fe2O3. I will appreciate to help me to interpretation this spectroscopy, especially the blue line.

31 July 2024 9,140 2 View

After a lot of feature engineering for CTR modeling, it feels like it's basically the end of iteration? I mean, it's not cost-effective to keep doing?

After a lot of feature engineering for click-through rate modeling, it feels like it's basically the end of iteration? I mean, it's not cost-effective to keep doing it?

29 July 2024 4,955 0 View