How to calculate Miller indices from available XRD data?

I want to calculate the miller indices for Graphene nano material from available XRD data, any method or suggestion in this regard. Whether it is possible for Graphene or not? Thanks with...

01 February 2019 9,762 4 View

Why more importance is given to SCI indexed journals, Specially in INDIA?

SCI or E-SCI is it indexing of Web of Science/Thomson reuters or is it different. If the paper published in journal which is indexed by E-SCI will be considered as same credit like SCI. Which one...

03 April 2018 2,452 0 View

During microscopy is their any chances of change in material thermal/ physical/ chemical properties?

07 August 2017 8,907 11 View

Will the first barrier fuel cladding of zirconium alloy can be covered by any other material?

I want to know about the fuel rod which is cladding of zirconium alloy can be covered by other material. if so, will its reaction distrubs the reactor or not.

06 July 2017 464 9 View

Any one have any contact of supplier or manufacture contact of Microreactor Assisted Nanoparticle deposition (MAND) system?

Need contact details of MAND system supplier or manufacturer?

10 November 2016 7,084 0 View

How much is the importance of surface morphology impact in pool boiling heat transfer enhancement?

How much is the importance of the surface morphology on heat transfer enhancement in pool boiling with respect to industrial scenario?

09 October 2016 2,124 2 View

I need technical details, specifications, uses and working of a rectifier. Can anyone help?

I came to know about the rectifier as a high heat flux ELECTRONIC components/device, so need deep technical details, its specification, uses, dimensions & working so i study in details about...

31 December 2015 3,962 1 View

What are the parameters to be studied for an experimental study on microchannel testing ?

While going through the research paper Pressure, Heat transfer coefficient, Inlet and outlet temperature of fluid, velocity of fluid, Reynolds number, etc are the parameter to be needed for study....

11 December 2015 1,390 6 View

Does anyone know about insulated-gate bipolar transistor; in this semiconductor surface minichannels can be prepared?

IGBT semiconductor, how it is manufactured or material used for process. Is it feasible to prepared mini channels on this semiconductor. What issues must be study before mini channels prepared...

08 September 2015 2,717 4 View

Can anyone suggest a good instrument for finding the physical properties of varying concentrated additives in water?

I want to find out the physical properties of some additives with varying concentration with and without mixing in the water; also the best instrument to measurement of surface tension values with...

06 July 2015 3,983 4 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

How two melting peaks in DSC of polypropylene can be merged into one crystallization peak?

The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...

03 March 2021 5,857 3 View

What are the countries most affected by extreme rainfall as a result of climate change?

Increased heat, drought and insect outbreaks, all associated to climate change, have increased wildfires. Decreasing water supplies, declined agricultural yields, health impacts in cities owing to...

01 March 2021 7,168 9 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Precipitate after adding laemmli buffer to protein solution containing Potassium Acetate?

Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...

01 March 2021 2,622 3 View

Heat exchanger with liquid Nitrogen as coolant?

I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...

01 March 2021 6,450 5 View

How can i resolve the "final solutuin is not converged" error in Comsol for my heat transfer simulation??

I have been trying to simulate heat transfer problem in Comsol 5.5 for long time but it always throw an error stating: "Failed to find a solution. Maximum number of Newton iterations...

28 February 2021 8,626 3 View

PUC19 as a transfer plasmid for lentiviral delivery?

Hello, Is it possible to use pUC19 as a transfer vector to be packed in using the second generation viral particles packaging system( pMD2.G; psPAX2 plasmids)? As far as I understand it there is...

28 February 2021 4,868 2 View

Necessary tube lenght to cool Natural gas in a dry-ice cooling bath?

I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...

27 February 2021 8,128 1 View

Can impedance of antenna be less than 50 ohms?

I am simulating helix antenna in hfss, right now, giving excitation with 50 ohms port. When I see the results of Z parameter (real). It shows lower than 50 ohms. Do not understand, if it can be...

27 February 2021 4,218 7 View