Any information on the tools/software to model the reverberant acoustic field and coupled structural responses ?

More Nazeer Ahmad's questions See All

Is IMPACT FACTOR justified in case of Taxonomy?

There is huge pressure of getting good impact factor on scholars now a days. On the other hand Taxonomy is a very dry subject and the concerned papers can only get citation in same group of organism.

26 February 2021 5,851 1 View

Why tick's salivary gland extract didn't run in the gel (SDS PAGE )??

Greetings, I want to make SDS PAGE for my sample (Tick salivery gland extract), I tried concentrations 10%, 12%. I also tried high molecular weight ladder. But the protein stopped at the top and...

25 February 2021 7,698 3 View

Is it possible to set a breakpoint at a specific DYNAMIC instruction using the GNU Debugger (GDB)?

Using GDB, it is straightforward to debug and monitor a target program by setting a break-point at a specific instruction, since the instruction addresses are known. However, we have two...

24 February 2021 1,598 2 View

How to measure the pH of Peat Soil?

Peat possess organic content above 75% and is highly acidic in nature (i.e. pH < 4). Before commencing stabilization, it is mandatory to know about the pH level of peat. Therefore, your...

18 February 2021 9,424 7 View

How to Measure Consumer Willingness To Change from petroleum-fueled vehicle to electric vehicle?

I wanted to calculate the probability of one consumer shifting from using a petroleum-fueled vehicle to an electric vehicle. Since my background is in engineering I do not know much about how to...

15 February 2021 9,190 5 View

Having trouble mounting the sections on the slides for IHC staining, what solution should I use?

Hello everyone, I just started learning IHC staining and I have some frozen sections to practice with in a 96-well plate. I'm having trouble mounting the sections on the slide, a colleague told me...

08 February 2021 6,880 3 View

How to use Image Lab to take an image for the bands and the ladder in the same image merged together in Western Blot?

Hello everyone. I was trying to use Image Lab software to take an image of both the ladder and the samples merged together in one image to see the position of the bands according to the ladder MW,...

04 February 2021 9,996 2 View

Need a research paper for multi speaker and single microphone acoustic echo cancellation?

Hi, I am working on a problem that involves multiple smartphones/tablets. All devices are playing the same sound with synchronization difference up to +- 5ms. Now, there is an echo issue and I...

02 February 2021 5,929 3 View

Can I use the result from a pilot study to decide the minimum sample size ?

Can I use the result from a pilot study to decide the minimum sample size required to compare the means using independent sample t-test ? Or any other way that can help me to determine the...

29 January 2021 7,677 6 View

How to prepare secondary antibody from lyophilized antibody?

So I'm new to lab research and learning Western Blots these days. I ordered my secondary antibody and it arrived in a powdered form. Here is the...

27 January 2021 5,402 3 View

Is it possible to do piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch?

How to do Piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch? Piezoelectric coupling between the rectangular substrate and rectangular...

02 March 2021 9,833 3 View

Absorption behaviour of anechoic model?

I have modelled a unit-cell of an anechoic structure using ANSYS. The layer is silicone and has been assigned as an acoustics physics region, with an air cavity inside (the air has been modelled...

18 February 2021 4,119 1 View

How can you tell if your organotypic slice culture is healthy ?

I'm working on organotypic cerebellar slice cultures from postnatal rats and I'm not sure how to tell if the slices are healthy at any given point. I know there should be a lot of microglial...

15 February 2021 2,830 2 View

Reaction condition to convert NH2 to COOH?

I need to couple Dopamine by NH2 end to silica nanoparticles coated by PEG-NH2, but first i need to convert the PEG-NH2 to COOH by using succinic anhydrous ... can you suggest a reaction condition ?

13 February 2021 2,768 4 View

Need a research paper for multi speaker and single microphone acoustic echo cancellation?

Hi, I am working on a problem that involves multiple smartphones/tablets. All devices are playing the same sound with synchronization difference up to +- 5ms. Now, there is an echo issue and I...

02 February 2021 5,929 3 View

How can I quantify background noise in a bioacoustic file?

I am using Audacity to analyse the presence of birds and frogs recorded with a SM4 recorder (Wildlife Acoustic). Background noise (rainfall, wind) is an important variable to consider that can...

28 January 2021 2,989 3 View

Coupled hydric and mechanical equation COMSOL?

hello i am trying to study the mechanical deformation due to the humidity on a 3d volume formed of 2 phases. my equation are dw/dt =grad(Dm*div(w)) and the mecanical is sigma=E*beta*nabla(w)....

27 January 2021 5,201 1 View

In abaqus, how to couple a reference point to a discrete rigid body?

I have two discrete rigid bodies. A axial connector was established to connect two reference points. Now the task is to attach the reference points to the respective rigid part. How should I do...

25 January 2021 5,079 3 View

How exactly modes are coupled into asymmetric directional coupler?

Currently I am reading one research paper regarding silicon based two and four mode division multiplexing for optical data transmission in 2 micrometer waveband. While reading I stuck at one...

21 January 2021 5,864 4 View

How to simulate Sloshing water using Dynamic mesh in ANSYS Fluent ?

I am trying to model sloshing water in a tank in ANSYS Fluent using Wall motion. BUT it seems that System coupling is not responding to wall motion and it works only with Dynamic mesh.

20 January 2021 2,963 3 View

Hafs Hajar

HI Nazeer Ahmad

I have a suggestion for you the Comsol Multiphysics to model the acoustic systems, it's a software wich based on finit element metod to solve the model. you can also found a librery on acoustics field integreted in this software .please check the link:

https://www.comsol.fr/acoustics-module

Nazeer Ahmad

Thanks Hafs Hajar for the answer.

Shahab Pasha

Comsol is the right tool for most simulations in general.

If you are more interested in acoustics and reverberation try the RIR generator

https://www.audiolabs-erlangen.de/fau/professor/habets/software/rir-generator