The equation at the terminal of the DFIG can be written as:
Vt = Vgsc - Xgsc*Igsc
However, in doing so it results in an algebraic loop.
How do I solve this?
Hi Mr. Chanditha,
Try introducing a brief delay outside the faulty signals or subsystems to break the algebraic loop.
Do you mean by simulating it in Simulink or so?, then follow the instructions of Yew-Chung Chak, add a delay.
Again, if it is in Simulink the Diagnostics tools can help identify the algebraic loops in the simulation. See the following link for details:
https://www.mathworks.com/help/simulink/ug/algebraic-loops.html
The system is basically three inductors connected to each other in one end and the other end connected to three independent voltage sources (See attached image). I want to get the equations in...
05 June 2018 9,068 2 View
I am starting my research modelling a DFIG for inertial response and also sub-synchronous resonance studies. An average model of the DFIG will satisfy my needs (Converter switching level modelling...
10 November 2016 5,808 2 View
In a dq reference frame rotating at synchronous speed: If the d axis of an induction machine is oriented with the maximum of the stator flux, how does it result in the stator q axis voltage (Vqs)...
03 April 2016 5,772 5 View
Could you recommend some articles on Urban Transportation System optimization and Innovation?
13 August 2024 2,595 3 View
Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...
10 August 2024 6,493 1 View
In order to show people the beauty of control and enhance enthusiasm for learning control theories, are there any good simple systems or platforms to recommend?
05 August 2024 10,034 1 View
Hi guys If anyone is currently working on aging cells, you guys would like to give me some advice. I'm testing against biomarker (SA-beta-Gal), I encountered a false positive in the control group...
02 August 2024 6,735 1 View
I am currently researching the impact of environmental toxins on children's health and would greatly appreciate insights from experts in the field. If you are an expert or researcher working on...
02 August 2024 4,474 2 View
I have seen plenty of existing works on applied Reinforcement Learning (RL) policies for optimized scheduling in IoT networks including Q-learning, DQNs, and the newer ones including PPO for...
01 August 2024 8,754 2 View
We have a lateral flow test on Sartorius 140 NC. The conjugate is gold-monoclonal antibody. Using different control lines (GAM, protein A, protein G) we get a very strong leading edge with reduced...
31 July 2024 4,510 3 View
Hello everyone What is your opinion about the introduction of an expert decision support system in which the rules are extracted from existing data without human intervention, instead of being...
31 July 2024 5,785 4 View
I am conducting my research regarding blood coagulation in patients with CKD. I observed a reduction in post hemodialysis aPTT and PT values compared to pre hemodialysis values. But most of...
30 July 2024 3,467 0 View
What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?
29 July 2024 7,714 4 View