Hello every one
I am trying to create a connection between a concrete deck defined as a shell and steel girders defined as wires, i have chosen to do this by creating an MPC connector type beam. i.e i created wire features and then assigned them with a beam type mpc in order to do this i used an orphan mesh.
see attached file for some pics
I keep getting these errors
eam mpc can not be applied to same node. This mpc is ignored.
Beam mpc can not be applied to same node. This mpc is ignored.
Beam mpc can not be applied to same node. This mpc is ignored.
Beam mpc can not be applied to same node. This mpc is ignored.
Beam mpc can not be applied to same node. This mpc is ignored.
Beam mpc can not be applied to same node. This mpc is ignored.
MPCS (EXTERNAL or INTERNAL, including those generated from rigid body definitions), KINEMATIC COUPLINGS, AND/OR EQUATIONS WILL ACTIVATE ADDITIONAL DEGREES OF FREEDOM
NODE SET ASSEMBLY_Attachment Points-1-Set-2 HAS NO MEMBERS AND WILL BE IGNORED. NODES DEFINED IN THIS SET MAY HAVE BEEN DELETED BECAUSE THEY WERE NOT CONNECTED TO ANY ELEMENTS.
NODE SET ASSEMBLY_Attachment Points-2-Set-1 HAS NO MEMBERS AND WILL BE IGNORED. NODES DEFINED IN THIS SET MAY HAVE BEEN DELETED BECAUSE THEY WERE NOT CONNECTED TO ANY ELEMENTS.
NODE SET ASSEMBLY_Attachment Points-3-Set-1 HAS NO MEMBERS AND WILL BE IGNORED. NODES DEFINED IN THIS SET MAY HAVE BEEN DELETED BECAUSE THEY WERE NOT CONNECTED TO ANY ELEMENTS.
NODE SET ASSEMBLY_Attachment Points-4-Set-2 HAS NO MEMBERS AND WILL BE IGNORED. NODES DEFINED IN THIS SET MAY HAVE BEEN DELETED BECAUSE THEY WERE NOT CONNECTED TO ANY ELEMENTS.
NODE SET ASSEMBLY_Attachment Points-5-Set-1 HAS NO MEMBERS AND WILL BE IGNORED. NODES DEFINED IN THIS SET MAY HAVE BEEN DELETED BECAUSE THEY WERE NOT CONNECTED TO ANY ELEMENTS.
There are 4 unconnected regions in the model.
- Badges
- Science topic
- Similar topics
- Developmental Psychology
- Attachment