Why should we use Sustainable climate design?

Sustainable design is a set of cognitive and analytical abilities, knowledge of the environment and ample practical to incorporate things into the world of microbes, plants and animals, and the...

25 January 2021 7,816 8 View

Is it possible to adapt all new and old buildings to be environmentally friendly and how can we do that?

An Architecture and Environmental Design degree studies the basic principles behind environmental issues that need tackling through architecture. Sustainable design is the field of creating...

25 July 2020 1,328 17 View

Free Water Hammer Transient Hydraulic applications?

I have found x2 application that fits the above category: 1] Very old 16-bit application but you can run it using opensource emulator otvdm (on github) https://imgur.com/a/aO7ZgXR 2] A modern...

12 April 2020 2,568 2 View

How draw a circle point-by-point with a spiral path?

I need a matlab program to draw a circle point-by-point with a spiral path, I have center and radius coordinates

19 March 2020 2,907 3 View

Best Reinforced Concrete Finite Element Analysis Software Package?

Respected colleagues, What is the best finite element modeling software packages for reinforced concrete elements, such as beams, slabs, columns, etc subjected to static monotonic loading? I've...

26 November 2019 2,704 8 View

How to find the PI gain for electrical parameter estimation in sensorless control of PMSM?

I want to know how to tune the PI controller in case of parameter estimation, let say i have equation Ls=[Kp+Ki/2]*[VdEd+VqEq] so how to estimate Kp and Ki value for better performance of the...

31 October 2019 3,691 4 View

Final year project on enery crisis?

i am doing electrical engineering.now i am in final year....i need help regarding final year project.....which power project shoud i work on?.....plz suggest me some topics....complete...

26 August 2019 4,159 3 View

Simulating the effect of adding an object inside Room Impulse Response generator or MCRoomSim?

Hi All, I am currently working with Room Impulse Response (RIR) Generator and MCRoomSim in Matlab for simulating room impulse response using different signals but is there a way to add objects...

21 March 2019 3,777 2 View

How can an inelastic orthotropic material be defined in Abaqus?

Like wood for example

09 August 2018 1,391 4 View

I want to draw rectangular patterns on along the circumfernce of the cylinder in fluent geomentry? can anyone help me regarding to this?

i want to draw geometry of roll to roll imprint lithography in ansys fluent.

21 February 2018 7,130 2 View

Does anyone know HRM channel in a 2 plex QIAGEN Rotor- Gene Q qPCR can be used as a separate channel?

I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...

01 March 2021 8,544 1 View

D2D implementation in Matlab in Vienna LTE software?

Hi Hope you are well. Can you please share your code for D2D implementation in Matlab. I want to implement D2D in Matlab based Vienna simulator and struggling to deploy D2D. Thanks

24 February 2021 9,378 3 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

How to simulate 5G Quality of Service characteristics?

For my research, I would like to simulate an end to end 5G network. My goal is to observe the behaviour of SDAP protocol, dynamic configuration of 5QI values etc. To summarize I would like to...

21 February 2021 7,624 3 View

Any way to separate out fluorescent channels from a composite image?

Hi there, I've been using the EVOS Auto II microscope for some time now and usually I will save the transmitted light/bright field image and the images from fluorescent channels as separate...

15 February 2021 546 3 View

Please, How can I plot a channel capacity of MIMO and SISO in matlab?

CSISO= f(frequency) : plot(f, CSISO) ? CMIMO= f(frequency) : plot (f, CMIMO) ?

13 February 2021 5,225 4 View

The reason of PMMA channels cracking?

07 February 2021 3,663 2 View

How can I reduce run-to-run variation in TMT MS experiments?

I planned an experimental setup using 10-plex TMT with 9 conditions and 1 bridge channel to compare 5 replicates. But since I experienced some run-to-run variation, I was wondering if a better...

31 January 2021 3,405 3 View

What method should I use for time-varying signal analysis?

Hello! We have a project where participants engaged in reading, thinking and then responding to an ethical dilemma. We used the EMOTIV 14 channel headset to track brain activity. The reading,...

29 January 2021 4,182 3 View

. How can we relate NB IoT with massive Machine Type Communications (mMTC) in the 5G era?

How can we relate NB IoT with massive Machine Type Communications (mMTC) in the 5G era?

19 January 2021 6,560 4 View