From different processes (CVD, PVD, SPIN, etc) | Contact experts in Thin Films to get answers
1,343 views 3,269 posts
Questions related to Thin Films
I am working in electrochemistry. please suggest . I am totally clueless.
07 March 2023 9,309 1 View
The substrate used is a microscopic glass slide. rGO is dispersed in NMP (N-Methyl-2-pyrrolidone) to form a dispersed solution. What is the best suited deposition technique to obtain an even...
06 March 2023 5,550 2 View
In my case: LiBH4 - LiBr in different molar ratio. I have the observed patterns (measured by XRD technique) for this mixture of compounds but I don't have .cif file or any reference to compare...
04 March 2023 2,636 4 View
After washed with distilled water
28 February 2023 2,333 6 View
Hi, We have performed SEM images of a polymer layer with silver nanoparticles. But, the images were blurred because the surface was not conducted. So , I ask who is familiarized with SEM...
23 February 2023 7,332 4 View
I need help with the Constrained Magnetic moment calculation in VASP for the h-LuMnO3 system (30 atoms). I should be thankful if anyone has taught me something about this field. I have read many...
23 February 2023 1,120 4 View
Is it ok to follow the normal cleaning procedure?
22 February 2023 172 1 View
Recently I have been working on the Synaptic Transistor for Neuromorphic Application; for a more detailed understanding of the Neuromorphic Application, I would like to learn to simulate an...
20 February 2023 1,451 5 View
Good Morning, I have a problem with modeling Schottky Diode, after designing this Schematic which Simulation should I choose to get a comparison between Current - Voltage, Voltage-Frequency? And...
18 February 2023 366 0 View
I got a pure ciprofloxacin powder from sigma Aldrich , and I didn't get information from the manufacturer about the potency of the antibiotic only the following information how can I calculate its...
13 February 2023 8,138 2 View
I sent a Mg(OH)2 sample to a lab for adsorption/desorption test. The results were returned to me
13 February 2023 1,458 5 View
Once we generate a high vacuum, metal oxide deposition requires certain O2 partial pressure. I didn't know, how to maintain the O2 pressure inside
10 February 2023 3,422 5 View
We want to make a vertical Schottky diode on a commercial Ga2O3 crystal. Characteristics of the crystal: β-Ga2O3 (-201), Sn-doped, Nd-Na = 5e18 (cm-3), h=680 micron. We are going to prepare the...
09 February 2023 6,004 1 View
I currently work on YBCO superconductor and wants to dope a Rare Earth element in YBCO so I want the order of critical current density in YBCO for best results. Thankyou
09 February 2023 1,879 0 View
Recently I am doing my undergrad thesis on CuO thin film. I am facing problem in XRD characterisation as the peak in 32 degree becomes abnormally high whereas it should be a minor peak. What could...
03 February 2023 1,030 5 View
Despite owing to their nano sizes (diametric), cnf paper are still translucent or only have contact transparency. How do you make these films more transparent?
03 February 2023 8,784 6 View
I need a clear explanation, How to add error values for all the experimental data?
02 February 2023 2,587 3 View
Hello researchers. I am a student who has just started research a PEC. It is very cold here. Is everyone having a good new year? i hope so. I am asking this question because I am curious about...
29 January 2023 7,045 4 View
I have a list of the path node labels, more than 10 thousand nodes, now I want to using this node labels to get the Field output values, how can I do? I know I can get the values though python...
28 January 2023 886 3 View
What is the optimum temperature we need to maintain while pouring the H2So4 in PVA soln?
27 January 2023 302 3 View
We have measured the transient of surface photovoltage in metal halide perovskites Cs0.05(MA0.14,FA0.86)0.95Pb(I0.84,Br0.16)3 We excited with light with photon energy ( ~1.26 eV) below the...
27 January 2023 892 3 View
After annealing of copper oxide, the crystal quality is improved however the light current of IV reduces as compared to the as-deposited sample. What may be the reason for reducing the light...
26 January 2023 8,259 3 View
Hello I have received the FTIR graph after the analysis of the sample but the graph isn't aligned to the baseline. I am attaching the file. Kindly guide me is it the sample or machine error?
20 January 2023 3,151 15 View
usually, in most of the xrd analysis intensity peaks fall at a higher angle.
18 January 2023 4,635 7 View