| Contact experts in Materials Engineering to get answers
1,391 views 2,373 posts
Questions related to Materials Engineering
we need alternative solution we can use it in electropolishing of carbon steel instead of H3PO4
07 July 2017 4,392 4 View
Nickel based superalloys
07 July 2017 7,764 11 View
Does the shape of the twin indicate whether it is mechanical/deformation or annealing twins?. I work on FCC sheet metal SS 304 and Inconel 601. I deform by cold rolling as well as heat treat...
07 July 2017 2,487 14 View
What is the relation between hardness and tensile properties.it often leads to confusion .is it proper to predict the hardness behaviour of alloys on a general basis from tensile properties.is...
07 July 2017 2,134 7 View
Materials engineering and Materials scientific
07 July 2017 6,304 0 View
I have been trying to prepare Ketjen Black-Sulfur composite by using SBR:CMC binder for a while. But, when I coat aluminum foil with this slurry, the coating always cracks during the drying...
07 July 2017 5,776 8 View
Since toughness is the measure of a material to deform past its elastic stage while retaining its stiffness, will the toughness obtained from compression tests correspond linearly with toughness...
07 July 2017 8,804 3 View
07 July 2017 317 2 View
I am seeking a conceptual understanding of how SFE could affect non-deformation properties of an alloy, such as (but not limited to) possible changes in phase transformations, precipitation,...
07 July 2017 1,633 8 View
I was wondering in which applications Al springs could be used. Usually the requirements for a spring material is a high Young modulus but aluminium has only E= 70 GPa. Compared with steel (E=210...
07 July 2017 2,249 4 View
04 July 2017 6,466 20 View
04 July 2017 2,977 12 View
03 July 2017 408 7 View
I want to know the best method to study deformation behaviour of High Entropy Alloy
02 July 2017 7,609 3 View
i want to know the advantages & disadvantages of mechanical (specifically sand blasting) & chemical finishes. The end product for finishing is composite sheet as well as ingot having main...
02 July 2017 8,161 3 View
02 July 2017 4,335 3 View
duplex structure (ferrite and austenite)
29 June 2017 7,934 3 View
Hello, Perhaps, someone saw/knows/has information about mechanical properties of AA 2060-T8 and 2098-T85 then please, provide it. I will be glad to get it. Thank you in advance. Best, Danyil Kovalov
26 June 2017 7,374 3 View
modern armor is manufacturing by non-Newtown fluid
25 June 2017 7,041 11 View
I want to know how much the yield stress of Ni is different from Ni3Al at lower temperatures in a nickel based superalloy. I am looking for some references in this regard.
25 June 2017 6,124 5 View
explain the Difference in heat transfer properties of natural and synthetic graphite
23 June 2017 4,734 1 View
what are the consequences of heating hydroxyapatite coatings in air at 900 oC
21 June 2017 2,239 3 View
Is it possible to do machining operations on solid graphite? What about its weldability?
16 June 2017 7,754 4 View
As we all know, Sr can modify Si particle size and morphology in Al-Si alloy. What can be used to modify CuAl2 phase in Al-Cu alloy?
12 June 2017 9,695 2 View