Contact experts in Continuum Mechanics to get answers
1,313 views 151 posts
Questions related to Continuum Mechanics
For comparing continuum fracture mechanics with peridynamics, I want to know which simple but classical phenomena cannot be explained or predicted by the fracture mechanics? In other words, what...
08 August 2015 675 2 View
It is possible to formulate elasticity on Riemann manifolds. However, the Cauchy decomposition theorem is preferably used in rheology in conjuction with irreversible thermodynamics. Therefore, it...
26 June 2015 3,069 2 View
06 June 2015 8,911 2 View
In addition, can sound waves have a transverse component?Is it possible to define something like an acoustic version of Poynting Vector?
06 June 2015 7,137 0 View
Hi every one I have a model in Abaqus with large deformation. When I run this model , Abaqus exit with this error: "Excessive distortion at a total of # integration points in solid (continuum)...
04 April 2015 6,320 24 View
Dear friends, Currently im performing my research regarding dynamic analysis of concrete masonry structure, by implementing macro modelling technique. I'm lack of understanding to obtain the...
04 April 2015 5,187 4 View
I am not sure how it is possible to get a softening response under load control (Pressure) in ABAQUS. I have applied surface pressure load on 3D shell element in Explicit analysis. What can be a...
04 April 2015 3,491 3 View
Can any one tell me how to get FLDCRT from ABAQUS like von Mises stress. After giving the Experimental values of major and minor strain datas in Abaqus Material property FLD Damage.
21 March 2015 543 1 View
I faced to the following error in using of cohesive elements in ABAQUS/Explicit: The ratio of deformation speed to wave speed exceeds 1.0000 in at least one element. This usually indicates an...
03 March 2015 6,952 11 View
03 March 2015 9,692 1 View
I'm trying to build a model in Abaqus to simulate a three-point bending test. My goal is to compare a simulated force-displacement curve with experimental data in order to retrieve some key...
24 February 2015 5,308 3 View
I am investigating into the flow in microchannels with bends. I have already applied no slip boundary conditions and now moving to Slip boundary conditions. From what I understand in Ansys you...
02 February 2015 982 13 View
02 February 2015 1,680 3 View
During working on soft tissue experiments, I need to try inverse finite element characterization and I need to check all disadvantages/limitations of this method.
02 February 2015 7,760 2 View
I want to compare between PLANE STESS and PLANE STRAIN analysis using PATRAN/NASTRAN. I know I can compare them in Isotropic but not sure about anisotropic materials. I have 2D rectangular...
02 February 2015 3,276 3 View
01 February 2015 5,396 2 View
Non conservative loading
28 January 2015 3,287 3 View
I want to find the 3 hugoniot parameters ( C, S, Gamma0) for Inconel 718
08 January 2015 9,463 0 View
Special yarns, resp. Yarns for technical applications are usually exposed to high dynamic loading during processing and in final use. Therefore, they fundamentally differ from traditional textile...
01 January 2015 6,515 4 View
01 January 2015 5,295 3 View
Dear friends, I want to do vibration analysis of Timoshenko beam with elastically restraints. Can anyone tell some books? Thanks.
01 January 2015 1,347 6 View
01 January 2015 4,922 1 View
In regard to schmid factor the two different angles are complementary to each other?
27 December 2014 2,546 7 View
12 December 2014 5,283 7 View