15 Questions 17 Answers 0 Followers
Questions related from Shanthi Swaroop S.
Structural health monitoring system are used to monitor the health of the architecture of the plane and constructions when they are monitoring , they used piezoelectric sensor to log the data. Why...
02 February 2018 4,883 5 View
I have to find a dielectric constant of a particular material. for ex. I need a titanium or combination of carbides.
04 April 2014 2,356 3 View
If silicon or germanium or any of the semiconducting material for function using the same material, what will happen when P-type is silicon and N-type is germanium combine together? Due to the cut...
10 October 2013 9,411 4 View
These is for making a input to the control board to set up the current value according to that it will the maximum current .
08 August 2013 3,408 3 View
Regarding a semiconductor where there is a conduction band & valance band.
05 May 2013 8,382 3 View
Due to the material characteristic the producing of EM waves will have any variation, if it is there in which material will EM be effective?
05 May 2013 5,057 4 View
It is related to high voltage sputtering. What is the purpose of using this technique, on which law it is working?
04 April 2013 9,519 5 View
Is this possible ? If possible how? What is the advantage if we use this technique?
04 April 2013 7,171 1 View
What software is used for physical vapor deposition and x-ray photo electron spectroscopy and plasma immersion ion implentation?
04 April 2013 3,113 2 View
Using high voltage sputtering.
04 April 2013 6,326 1 View
Assume that while travelling in bus or train we are standing at point having a communication and having a conversation on our mobiles. Is there any difference in battery usage from these two modes?
03 March 2013 1,554 9 View
RF waves and antenna height.
03 March 2013 5,290 5 View
The wave which is transferring through a medium , if it hit a surface wat will be the reflected wave
03 March 2013 8,832 3 View
At a low voltage, I need to transmit the RF signal over a distance of 1 - 3m with the combination of low frequency below 100Hz.
03 March 2013 8,083 8 View
I mean due electrons or hole which will effect the device to get into not working condition.
02 February 2013 3,892 5 View