11 Questions 21 Answers 0 Followers
Questions related from Mohsen Sabouri
We need the reference electrode to carry out the electrochemical corrosion tests at max. 10 bar (H2S or/and CO2) and 20-150 °C.
07 July 2018 965 9 View
Using solid state reference electrodes to do electrochemical tests at high pressure (0-10 bar, H2S/CO2)/high temperature (10-150 °C) conditions.
07 July 2018 2,433 1 View
Hi everyone, The attached file compares the XRD patterns for the oxide and oxide-CNT coatings on aluminum substrate with relatively similar thicknesses (~ 30 µm). As it can be seen, all the XRD...
08 August 2017 811 4 View
We are going to prepare a ceramic layer (Al2O3) containing MWCNT without enhancing the conductivity of ceramic layer.
10 October 2016 6,465 5 View
The attached files are related to a ceramic-MWCNT composite layer. However, I am not sure that the G nd D peaks in the Raman spectra are the characteristic of MWCNT or carbon fibers? Also as the...
06 June 2016 4,591 7 View
This spectra is related to a ceramic/CNT layer that created using plasma electrolytic process. Functionalized MWCNT is used for this purpose. Could we conclude the incorporation of MWCNT in the...
05 May 2016 9,420 8 View
Could we consider diffusion behaviour at frequencies about 1-100 Hz?
01 January 2016 7,231 2 View
I need it for electrochemical noise analysis by phase space reconstruction theory.
01 January 2016 7,901 2 View
Hilbert-Huang transform and signal processing
09 September 2015 7,975 6 View
Electrochemical Aspects of Corrosion
05 May 2015 8,288 5 View
Consider a Al2O3-AlPO4 compound for RAMAN analysis by laser wavelengths ranging from visible to near infra-red. Whether the results will be similar?
01 January 1970 166 3 View