Ali Analooee

6 Questions 5 Answers 0 Followers

Questions related from Ali Analooee

Which parameters must be changed in order to change the type of the road in the magic formula tire model?

Dear all, I have a magic formula tire model and I want to change the type of the road in this model. For example I want the road to be snowy. Which parameters should I change for this purpose and...

26 December 2020 6,469 7 View

Is there any transfer function between the position of the accelerator and brake pedals and wheel torque?

I have designed a trajectory tracking controller for a passenger car. The output of the controller is the applied torque to the wheels. I decided to verify this controller using an IPG carmaker...

02 March 2020 2,955 4 View

How can one apply the normal load of the tire in magic formula pac2002?

The following equations are the only equations related to normal load of the tire, and they show that the normal load is not defined as an input to the tire model! Therefore, you can not apply the...

13 July 2015 6,975 3 View

How can one apply the normal load of the tire in magic formula?

In magic formula tire model, tire forces are depended on Fz0 and lambdaFz0, but Fz0 is a constant parameter. Therefore, should we change the scaling factor lambdaFz0 in order to make F'z0 equal...

10 July 2015 8,712 7 View

Which tyre dynamic model is the best for simulating a 5 degree of freedom passenger car model with radial tyres?

I want to simulate a 5 degree of freedom passenger car model ( a 3DoF bicycle model + 2 degrees for longitudinal slip of front and rear tires) with radial tires. This model contains simultaneous...

08 May 2015 5,378 3 View

How does one provide lateral force understeer characteristic in torsion beam suspension system?

One method to achieve "lateral force understeer" characteristic in torsion beam suspension system is to use special bushes; such as complex bushes. dose any one know any thing about this method...

13 August 2014 7,656 3 View